Best Inch Dual Exhaust Tips

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

FLOWMASTER FLOWFX CAT-BACK EXHAUST SYSTEM,409S STAINLESS STEEL,4" BLACK CERAMIC TIPS,DUAL SAME SIDE EXIT,COMPATIBLE WITH 2009-2020 TUNDRA 4.6L, 4.7L & 5.7L

  • Brand New Flowmaster FlowFX Cat-Back Exhaust System, 409s Stainless Steel, 4" Black Ceramic Tips, Dual Same Side Exit, Compatible with 2009-2020 Tundra 4.6L, 4.7L & 5.7L (Holley Part #717786).
  • Introducing the new Flowmaster FlowFX Cat-back exhaust system. This bolt-on emissions legal system is perfect for the person looking for an exhaust with a moderately aggressive interior & exterior tone with all of the performance benefits that you would expect from Flowmaster. Features include dual 2.5"stainless steel mandrel-bent inlet tubes flowing into a FlowFX straight-through performance muffler, giving a deep powerful tone outside the truck with a deep mellow tone inside the cab..
  • The dual 2.5" tailpipes exit in front of the passenger side rear tire & are finished off with a pair of large 4" double wall black ceramic coated stainless tips. Includes all necessary parts, hardware & detailed instructions for an easy at home install..
  • Features: Large 4" Black Ceramic Coated Stainless Steel Tips | Straight-through FlowFX Series Performance Muffler | Dyno Tuned For Maximum Performance | Stainle....
Check Stock

Exhaust Muffler Pipe Tip Fit for Mercedes-Benz C-Classs W204 C180 C200 C260 C300 C350 C63 AMG Style F-71-0023-01-D,Dual Exhaust Pipe Tips 304 Stainless Steel Inlet 2.5" Outlet 4.5" Outlet-Pack of 2

  • Exhaust Tip 2.5 inch Inlet 4.5 inch Outlet 10.00 inch long Dual Slant.To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch.
  • Pack of 2 Exhaust Tips for Mercedes-Benz.
  • Professional installation is highly recommended.
  • Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty..
  • Weld On installation and Thickness Double Wall Slant Rolled Edge Design.
  • 12 MONTHS WORRY-FREE :We maintain high standard of excellence and strive for 100 percent customer satisfaction. If you have any query of your order, please feel free to contact us firstly before you leave a feedback, we will get back to you within 12 hours on working day!.
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

gulrear Sliding Door air Conditioner kit with Dual Hose,Adjustable Length from 20" to 87" Suitable for 5.9" Diameter Exhaust and 5.0" Intake Dual Hose Portable AC Sliding Glass Door Vent Kit

  • 【Designed for Specific Dual Hose Portable Air Conditioners】This Plastic Sliding door Seal Panels kit Design Compatible with a Dual Hose Portable Air Conditioner 5.9 inch Diameter Exhaust and 5.0 inch intake hose - Great Alternative to Factory Default kit Included with Your Dual Hose AC.
  • 【Great for Tall Sliding Windows Not Just Sliding Doors】Slide Door Vent Kit Consists Of Four Plates, Total 256cm/101Inch Length, Max Adjustable Length 220cm/87Inch, Be Satisfied With The Needs Of Different Sliding Door Heights.Slotting the Plates Together toThe Desired Length of Your Chosen Door - You Don't Need to Use All Four Plates if it's Not Necessary..
  • 【Easy set-up】 This kit was easy to extend to my window needs,Easy to install. Make sure you do your measurements before buying. These panels are easy to adjust with the slider nuts.The AC Door seal kit can be shortened or lengthened for the Desired fit And works with both vertical and horizontal sash windows. Installation couldn't be easier - simply slot, slide and lock into place!sliding door air conditioner kit is the perfect solution for efficient use of your AC unit..
Check Stock