Best Inch Bulkhead Fitting

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

Check Stock

Outus PVC Bulkhead Fitting Water Tank Connector for Rain Barrels, Aquariums, Ponds or Water Tanks (2 Inches)

Product size: 2 inches PVC bulkhead fitting, measures approx. 52 mm x 108 mm.
Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
Please refer to the picture for the detailed size, and please make sure your barrel fits our product before purchasing.
Function: locking nut is reversed threaded.
The bulkhead fitting with 6 mm thick silicon seal gasket that will contour to the shape of the round barrels.
Durable and longer lasting PVC versus standard plastic bulkhead fittings.
Easy to install: requires 3 inch hole saw to install.
Threaded from the front end, suitable for commercial and industrial use.
What you get: 1 piece oversized PVC bulkhead fitting in your package, efficient to use it on your water tank.

Check Stock

JoyTube 1” Female PVC Bulkhead Fitting with Plug Silicon Seal Gasket Water Tank Connector for 1-3/4 Inch or 2 Inch Hole Saw Rain Barrels, Aquariums (pack of 2)

Size:1 inches female. The PVC Bulkhead Fitting is perfect for 1-3/4 inch or 2 inch hole saw to install.Assemble the bulkhead and hose adapter together.
Made of durable PVC material which is no fade, crack and peel..
Threaded from the front to end, suitable for industrial and house using. It can be installed in water tank, storage barrel and rain barrels..
Package including: 2 pcs bulkhead adapters, 2 pcs plugs and 2 pcs thick silicone seal gaskets..
The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..

Check Stock

Ququyi 2 Inch PVC Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting for Rain Barrels, Aquariums, Ponds(Set of 1)

Size & Material: 2 inch and qualified PVC,seal gaskets is 9mm thick.
please note locking nut is reversed threaded..
How to Install: the PVC Bulkhead Fitting is drill 3 inch hole to instal. Assemble the bulkhead and hose adapter together..
Durable: will not crack, fade, or peel.The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..
Package including: 1 pcs bulkhead adapters, 1 pcs plugs and 1 pcs seal gaskets..
Widely Application: suitable for industrial and house using.It can be installed in rain buckets, water tanks, water trough, ponds or aquariums, very fast and easy way to empty your rain barrel..

Check Stock

QuQuyi 3 Inch PVC Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting for Rain Barrels, Aquariums, Ponds(Set of 1)

Size & Material: 3 inch and qualified PVC,seal gaskets is 5mm thick.
please note locking nut is reversed threaded..
How to Install: the PVC Bulkhead Fitting is drill 4.17 inch hole to instal. Assemble the bulkhead and hose adapter together..
Durable: will not crack, fade, or peel.The bulkhead fitting with a thick silicone seal gasket will creates a better tight seal..
Package including: 1 pcs bulkhead adapters, 1 pcs plugs and 1 pcs seal gaskets..
Widely Application: suitable for industrial and house using.It can be installed in rain buckets, water tanks, water trough, ponds or aquariums, very fast and easy way to empty your rain barrel..

Check Stock

Home Intuition Outdoor Foam Faucet Cover, 3 Pack

Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included..
Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water..
ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL..
Freeze Proof, Life Time Warranty against leak, crack or break..

Check Stock

Renator Brass Rain Barrel Spigot Kit. Lead-Free Compliant. 3/4 Inch Quarter Turn Ball Valve. Rain Barrel Kit For Any Barrel Including 5 55 Gallon Drum Spigot Bucket. Spigot with Bulkhead Fitting, Tape

... advantage of water pressure in your rain barrel to produce superior water flow. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
COMPLETE KIT AT A FAIR PRICE. Instead of purchasing separate washers and fittings, save yourself time and money by purchasing this full kit at once. This kit contains: 3/4" spigot with quarter turn valve, 3/4 inch....

Check Stock

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..

Check Stock

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

...e a strong water flow by relying on pressure from the water in your rain barrel. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
HEAVY-DUTY, DURABLE CONSTRUCTION. From using a brass ball valve and body and aluminum handle (with orange paint spray), this spigot is built for longevity. The spigot also contains less than 0.25% lead, compliant with ....

Check Stock