Best Impedance Pcb

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module, Wireless Transmission Serial Transceiver Receiver

  • ESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash.
  • Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning..
  • Easy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself )..
  • ESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved..
Check Stock

Presonus Bluetube DP V2 2-Channel Tube Mic Pre-Amp DP2+Mic+Shockmount+Headphones

  • Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer). Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB.
  • Frequency Response: 30Hz - 20 KHz. Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz. Load impedance: Greater or = to 1000 Ohms. Equivalent Noise level: Less than 18dB A (IEC581-5). Max. Input SPL: 126dB(THD.0% at 1kHZ). Electrical current: Greater than 4.8Ma. Microphone body net weight:320 Grams (0.7 Pounds). Microphone Max.diameter 44mm (1.73 inches). Microphone Length 217mm (8.54 inches). Microphone material: steel grille + Alluminum (handheld part). PCB Layout: Surface mount.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

xqjtech PCI-E PCI Express 3.0 X4 to NVME M.2 NVME to NVME SSD PCI-e 3.0 x 4 Host Controller Expansion Card Support M Key SSD Type 2280 2260 2242 2230 Adapter Converter

  • 1. PCI-E 4X high-speed stability, PCI Express 3.0 architecture, single-channel (X1) unidirectional broadband theoretical speed is close to 1GB / S, the product 4 channel (X4) two-way broadband theoretical speed up to 8GB / S..
  • 2. Explosion-proof solid capacitors, all solid capacitors, high performance, high quality electronic components, solid capacitors, environmental protection, low impedance, high and low temperature stability..
  • 3.M-KEY High-quality with elastic connector makes the contact more stable, intelligent LED indicator, always flashes when plugged in cartoon, flashes when reading and writing..
  • 4. Thickened immersion gold PCB card, gold-plated version is more durable and stable than tin-plated board, especially for high-speed signal transmission with better continuity and stability..
  • 5. Installation method: 1. Insert the corresponding interface obliquely. 2. Fix the screw hole of the tail. 3. Insert the conversion card into the PCIE interface of the main board and fix it with screws..
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock