Best Iizy Brass No Touch Tool

Fiada 2 Pcs Olive Puller Olive Remover Puller Tool Compression Sleeve Puller Ferrule Removal Tool for 1/2 inch and 3/4 inch Brass Pipes

  • Applicable Model: the ferrule removal tool can be applied for brass pipes or copper pipes with diameter of about 15 mm/ 1/2 inch and 22 mm/ 3/4 inch,....
  • No Damage to the Pipe: the compression ring removal tool is an ideal tool for you to remove olives from pipes, allowing you to remove damaged olives....
  • Sturdy for Long Time Use: made of solid brass material, the compression sleeve puller is smooth on the surface, with high strength and hardness, not....
  • Simple to Apply: the ferrule puller is easy to use, no need to read the manual or use other tools to work, saving your time and energy, convenient for....
  • Wide Range of Applications: the olive puller for compression sleeve has a wide range of applications, to increase torque and remove olives more....
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ... tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential t....
Check Stock

Super Strong Automatic Center Punch - 6 inch Black Steel Spring Loaded Center Hole Punch with Adjustable Tension, Hand Tool for Metal or Wood with Zippered Hard Shell Carry Case - Pack of 2

  • MORE POWER. AMAZING TOOL THAT MAKES IT EASIER TO DRILL: Picture having an automatic hand punch tool with a spring loaded mechanism that actually works and makes a solid mark in wood, metal, steel, aluminum, brass, copper and more. This Forge Industrial Brass Center Punch gives your drill a start point and makes it easier for you so it doesn’t slip in tight spots. Don't let your drill walk again!.
  • EXTREME STRENGTH. MORE DURABLE THAN OTHERS: Our automatic center punch is made of a well machined brass body and has a deeply knurled surface which means that it will not slip and offer more precise handling and control. Each metal hardened and chrome plated tip lasts for hundreds of strikes so you can get the job done!.
  • ADJUSTABLE TENSION. EASY TO USE: Because the Forge Industrial brass center punch has an adjustable tension screw you will be able to get it just right so you can use with a simple one hand operation. No more hammering!.
  • SAFETY TOOL. USE AS AN EMERGENCY CAR WINDOW ESCAPE: If you have been looking for an car emergency escape tool, then your search is over! Thats because our automatic center punch is not only for wood and metal but able to shatter glass car windows which means that you can leave one in your car and always be prepared. Just ....
Check Stock

Tektall 61360 3pc Brass Drift Punch Set,Hand Tool Punches Tools for Home use

  • 【Made from Brass】 Tektall Drift Punch Set made from brass for non-sparking applications critical in hazardous conditions..
  • 【Used for Non-marring Applications】 Brass tools will not marr components that are harder than the tool itself.In cases where appearance is important, brass tools are recommended..
  • 【Knurled Design Handles】 Handles have a knurled grip for a more secure grasp of the tool..
  • 【Package Includes】 25075 - 3/4-Inch Brass Drift Punch Knurled, 25076 - 1/2-Inch Brass Drift Punch, and 25077 - 3/8-Inch Brass Drift Punch..
  • This kit work great if you need a nonmaring punch. The knurling is nice and grippy..
Check Stock

rOtring 300 0.5mm Mechanical Pencil, Black (502305)

  • Rotring brass mechanism for precision lead advancement.
  • Fixed lead guidance sleeve preventing break and offering an unimpeded view of the page for precise ruler-based drawing.
  • Soft touch rubberised grip for a great comfort.
Check Stock

Arrows Before Bullets (8-Bit)

  • ...y Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
  • Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
  • High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
  • Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
  • Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to complete your reloading project.
Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

  • ...not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
  • 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening....
Check Stock

PATIKIL 2mm Tube Brass Compression Fittings 15 Pack Insert Tube Support Compression Sleeve Fitting

  • Total Size: 4mm x 10.5mm / 0.16" x 0.41"(OD*H).
  • Package List: 15 x Brass Compression Fittings.
  • Advantage: Made of brass material, which is corrosion resistant, high pressure resistant, durable and has a long service life..
  • Instruction: This insert sleeve can be connected to copper, brass, aluminum, or plastic tubing. No flaring tool is required for assembly..
  • Application: The insert sleeve is commonly used to connect lines for air, water, oil in a quick and simple way..
  • NOTE: Please confirm the size before purchasing it!.
Check Stock

Mini Brass Wood Jack Planes for Hobbyist Model-makers Wood Workers (Set of All 3 Jack Planes)

  • Set includes 3 mini jack planes includes 1 x Bullnose plane, 1 x Scraper plane, 1 x Block plane.
  • Blades are hardened and tempered. Solid Brass and Hardwood construction.
  • The bullnose plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 23° blade angle The scraper plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 25° blade angle The block plane tool: 3 inch l x 1/2 inch w x 1/16 inch h with 25° blade angle.
  • They are great for adjusting the soles of small planes, as well as for touch up on full size projects..
  • These planes are very useful for hobbyists for doing small precise jobs where a bigger plane would be too large.
Check Stock