Best Iec 61000 4 2

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 200mm (7.87”) and thickness 5mm (0.2”)..

Replacement Fingure 8 AC 2 prong IEC C7 125V 10A / 7A power cord cable for Sony Playstation 4 slim.
Replace your overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience.
Figure 8 Power Cords ,125V 10A NEMA 1-15P to IEC320 C7,Non-Polarized,NISPT-2 18AWG(approx.0.824mm2) extension cable connects from your equipment socket to a standard 2 pronged AC outlet receptacle..
2 slot power supply replacement cord ac cable for Sony Playstation 4 PS4 slim.
Package content: 1 x 8Ft Extension AC Cable Power Cord Replacement for Sony Playstation PS4 slim.

BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
one (1) compatible Slotted Steel Zinc Plated....
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....

...rews (#10, 1/2") for immediate installation.
APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).

Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear.
True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform.
Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms.
Live circuit detection prevents insulation test when voltages over 30V are detected.
Safety ratings include Ingress Protection certified IP40.
IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1.
and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2.

Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws..
Rated voltage: 600V, IEC 800V. Rated current: 20A, IEC 32A..
Conductor cross-section, solid(AWG/mm²): 24-12, IEC 0.2mm²-4mm². Conductor cross-section, flexible(AWG/mm²): 20-12, IEC 0.2mm²-2.5mm².

【Better Price for Business Customer】OEM/ODM Manufacturer for 1000+ clients, 14-year manufacture experience, 22-year development experience.
【ISO 9001: 2015 Certificate】EN 61000-6-3:2007/A1:2011/AC:2012 EN 55014-1:2006/A2:2011 EN 60950-1:2006/AC:2011.
【Reliable Quality】High efficiency up to 95% ,100% full rated power and stable output voltage, 100% burn-in test and 4 times quality inspection,....
【Multiple Protection】 Over current protection, Output over voltage protection, Output short circuit protection, Over temperature protection, Input....
【Fast After-service】Two years warranty, Good and fast after-service support, Extra free fuse, English manual for installation easily.

【True Cat8 Performance】2GHz frequency and 40Gbps in data transfer, compliant with ANSI/TIA568.2-D Category 8, ISO/IEC TR11801 Class I, IEC61156-9 Cat.8.1, Flammability rating at UL444 CM or CMR, IEC60332-1-2, IEC60332-3-24, LSZH Acidity: IEC60754-2, Smoke Density: IEC60332-3-24. RoHS supporting 10BASE-T, 100BASE-TX (Fast Ethernet) 1000BASE-T/1000BASE-TX (Gigabit Ethernet), 10GBASE-T (10-Gigabit Ethernet) and 25GBASE-T (40 GbE)..
【Quality Build】22AWG solid copper conductor wiring, individually foiled pairs with aluminum shielding & overall cable screen shielding provides the basis for extreme reliability and blazing fast connections. Certified according to specification Class I in according with IOS/IEC 11801-1 Ed. 1.0 up to 2GHz..
【Next Gen】Next generation 40G network systems are ideal for corporate network systems, datacenters, broadcast stations, media/video servers, & those with extreme high-speed networking needs. Available in 1m, 2m, 3m, 5m, 7m, 10m, 15m, 20m, 25m and 30m lengths. *** This highly double shielded wires may not work with some non-10G equipment which cause “Antenna Effect” bottlenecking network speed (down to less than 100mbps). Please contact us for devices that are not supported..