Best Ice Auger 2

VEVOR Ice Drill Auger, 8" Diameter Nylon Ice Auger, 39" Length Ice Auger Bit,Auger Drill with 11.8" Extension Rod,Auger Bit w/Drill Adapter,Top Plate & Blade Guard for Ice Fishing Ice Burrowing Red

High-Performance Drilling: The ice drill auger's effective length is: 39 inches, rotating diameter: 8 inches, weight: 6.4 lbs/2.9 kg. It is lightweight, sharp, and durable. It can be used with an electric drill to meet your daily needs..
Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which are lightweight, durable, and rust-proof. Meanwhile, it has good tensile, impact resistance, and flexibility, saving your labor and time..
Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a hot knife through butter. In addition, the edges come with a blade guard, which can keep the blades from damage and extend the blades' service time..
Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
finally, fix it with a special bolt. Extension rod length: 11.8"/30 cm. The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you....

Check Stock

SORANGEUN 31.5”x6” Ice Auger,Heavy-Duty Ice Augers for Ice Fishing,Auger Drill Bit for Ice Post Hole Digger,Bule Ice Fishing Auger

【Sturdy Material】Our ice auger is made of heavy iron, which can effectively prevent the ice auger from breaking during drilling. The blade at the bottom is made of stainless steel, which will not rust even after multiple uses..
【Sharp Blades】There are 2 rotary blades and 1 central blade at the bottom of the ice drill, which are made of high-quality stainless steel to prevent rust while maintaining the characteristics of light weight and sharpness. At the same time, the three blades can be replaced at will. You can easily make many water ice holes..
【Suitable Size】Our ice fishing auger is carefully designed by the designer, with a length of 31.5 "and a width of 6".Too short size will damage your waist and back when punching, while too long size will be inconvenient to carry..
【Easy to Install】This ice auger is very simple in terms of blade installation and connection with the drill. The blade can be directly disassembled and installed with a screwdriver.
When connecting with the drill, pay attention to the hole size of the ice drill. The hole diameter of this ice drill is 0.75 inch..

Check Stock

XtremepowerUS 81093 V-Type 55CC 2 Stroke Gas Post Hole Digger W/Ice Auger Bit, red/Black

Post hole diggers are made adaptable with most standard auger bits with shaft size of 3/4-inch.
Easy-to-grip finger throttle and switch control on handlebar for enhanced user power and speed control at your fingertips.
Engine Type: Single Cylinder, Air-cooled Gasoline Engine.
Steel Ice Augers come in 10"inch (diameter), to suit the best of all your boring needs. Our Ice Auger will get the job done for you! Auger that will let you catch fish on a whole new level!.
Engineered with a manual recoil start easy fuel delivery system that allows for a quick-pull start action and the built-in translucent fuel tank lets you easily keep track of the proper fuel level.
Package Content - 55CC Gas Powerhead Auger Digger Machine with 10"-inch Auger Bit Set.

Check Stock

DOMINOX Electric Ice Augers for Ice Fishing with 8"x39" Ice Auger Head and High Performance Lithium-Ion Battery 40V 4Ah, Ice Augers for Ice Fishing and Ice Drilling

【Safety Stop Button】: Electric ice auger designed with an easy to reach "Safety Stop Button" for your safety..
【Forward & Reverse Operation】: Ice fishing auger can easily drill ice holes with forward operation. Reverse operation function to quickly eject ice slush without having to shovel..
【Flexibility】: Allowing the flexibility to extend the length of auger as ice thickness increases..
【LED Light】: LED Light allows you to dig in the dark or for your night fishing fun..
【Environment Protection】: Ice fishing auger for cordless drill no gas, no oil and no fume..

Check Stock

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..

Check Stock

VEVOR Ice Drill Auger, 8'' Diameter Nylon Ice Auger, 41'' Length Ice Auger Bit, Auger Drill w/ 14'' Adjustable Extension Rod, Rubber Handle, Drill Adapter, Replaceable Auger Blade for Ice Fishing Red

High-Performance Drilling: The ice drill auger’s effective length is: 41 inches (without the extension rod), rotating diameter: 8 inches, weight: 11.13 lbs/5.05 kg. It is the ideal choice for ice fishing, science exploration, etc..
Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which is lightweight, durable, and rust-proof. Meanwhile, it has good tensile, impact resistance, and flexibility, saving your labor and time..
Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a knife through the butter. In addition, extra two blades are included for replacement. Finally, the blades come with a blade guard, which can prevent the blades from damage..
Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
finally, fix it with a special bolt. Adjustable length: 41"$.5" 8".
104 cm/113 cm/122 cm. The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you from the hurt of splashing ice..
Professional Accessories: Unlike other ice augers, our ice drill featu....

Check Stock

VEVOR Ice Drill Auger 6 Diameter Nylon Ice Auger 39 Length Ice Auger Bit,Auger Drill with 11.8 Extension Rod,Auger Bit w/ Drill Adapter,Top Plate & Blade Guard for Ice Fishing Ice Burrowing Red

High-Performance Drilling: The ice drill auger’s effective length is: 39 inches, rotating diameter: 6 inches, weight: 4.9 lbs/ 2.2 kg. It is....
Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which are lightweight, durable, and rust-proof. Meanwhile, it has good....
Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a hot knife through butter. In addition, the edges....
Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the....
For Ice Fishing: This ice drill is very suitable for ice fishing enthusiasts due to its professional design and lightweight. It can easily punch the....

Check Stock

Romalon WR17X11705 WR17X11939 Ice Maker Auger for General Electric & Hotpoint Refrigerator Freezer Ice Bucket AP3849786 PS1018130 AP3672963 PS964350

★PARTS NUMBER: WR17x11939 WR17x11705 ice dispenser auger for ge refrigerators..
★REPLACeMENT PART #'s: The WR17X11705 Ice Dispenser Auger replaces part numbers: AP3849786, 1166053, AH1018130, EA1018130, PS1018130, WR17X10835,....
★FOR GE & Hotpoint: Exact fit most GE Refrigerator P Series and Hotpoint refrigerator T series..
★EASY TO INSTALL: Inexpensive way to repair a refrigerator. You may need to replace the auger if your ice maker is noisy, or not dispensing ice..
★QUALITY GUARANTEED: The auger is made from sturdy materials and well-tested by the manufacturer. Non original aftermarket part. Fits OEM Standards!.

Check Stock

K-Drill Idrl24 Orange Safety Cap(Blade Cover)

PERFECT SOLUTION –It is essential that you protect your Ice Fishing Auger from falling under the ice when using a battery powered drill. Simply add an AUGER STOPPER with adapter to the top of the auger shaft to solve this very problem. **For HAND augers only. Does NOT fit K-Drill Augers**.
QUALITY - This item is a newly manufactured product on the market to make sure you have a stress-free fishing experience. Very durable, made of a heavy-duty solid red plastic disc with a stainless-steel adapter. *Patent No. US D907,071 S.
Diameter: 0.71"/1.80 cm, Wing Bolt Hole: 0.25”/6.64cm, Chuck: fits up to ½” drill bit. Auger Stopper Disc.
Diameter: 9”/22.86cm, fits up to 8” auger blades. Washer.
Diameter 5/8”. E-clip. *For Hand augers only. Does NOT fit K-Drill Augers*.
ASSEMBLY REQUIRED –The Auger Stopper includes 4 parts.
(1) stainless-steel adapter (1) steel washer (1) e-clip (1) stopper disc. Assembly instructions are included with packaging, making it easy to install within a few minutes. PLIERS WILL BE NEEDED for assembly..

Check Stock