Best Ic Card Heat Meter

Bluetooth X6BT Card Reader Writer Encoder Card Writer Device

  • 2. Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type).
  • 3. Supports ISO 14443 Type A and B, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags. Supports new IC Ultralight C (via pseudo APDUs) and IC Plus....
  • 4. Working frequency with 13.56MHz frequency, can be used as both card reader and writer. Operating distance: up to 50mm (depends on tag type).
  • 5. Package including 1 card reader writer + 5pcs S50 cards + 5pcs UID writable keyfobs + free SDK software.
Check Stock

eBuricacid Uric Acid Test Kit-Only 0.5uL Capillary Blood required for Test. Includes 25 Test Strips, Lancing Device, lancets-25 count, Carrying Case, Warranty Card

  • Blood uric acid tester: Quick Testing of Uric Acid levels of blood. Highly accurate results just in 15 seconds. eBuricacid meter is light weight and easy to use. Stay updated with your Uric Acid level and live a healthy life..
  • Results storage: eBuricacid uric acid test meter comes with an excellent feature of in built storage of 180 most recent results with Time and Date which allows users to keep track of their Uric Acid levels..
  • eBuricacid complete starter kit: The uric acid tester kit is designed for both self-testing or healthcare professionals. It includes 1 uric acid meter, 25 sample strips, 2 Batteries, 1 Lancing Device, 25 gauge lancets, Pouch and Warranty Card..
  • Uric Acid Test Guidelines for Accurate results: The uric acid levels will fluctuate during the day due to consumption of food, hydration level and physical exercise. Therefore, It is recommended to do uric acid testing first thing in the morning without any intake of water or meal for accurate results..
  • Blood Uric acid kit instructions: The eburicacid blood uric acid test strips are intended for use with the eBuricacid Blood Uric Acid Meter only. Strips should be stored in a dry place at temperature between (39°F - 86°F). Test strips should not be exposed to heat, direct sunlight, or f....
Check Stock

40PCS NFC Tags NTAG215 NFC 215 Cards 504 Bytes Memory Blank PVC Cards Ntag215 NFC Chip for NFC Phone and Device Writeable Programmable

  • 1) This device is used to read and copy 125KHz and 13.56MHz frequency RFID key cards..
  • 2) Support card type: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. Can't support HID chip..
  • 3) Support card type: for 13.56MHz IC type: Mi-fa re 1k, UID, FUID, CUID, UFUID, IC Half-encryption, IC Full-encryption etc. (Not all type encrypted....
  • 4) Provide free software, very easy to use. Mini and light weight. Connect this device to your computer with the USB cable, then can find the....
  • 5) Has a USB interface, Two-color LED light prompt. Built-in buzzer "beep" sound reminder. Package including 1RFID copier + 1 USB cable + 5 RFID T5577....
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

HiFi Balanced XLR Digital Amplifier Home Stereo Speaker Amp w/VU Meter 300W x 2

  • ... Separate control for left and right channels: two volume knobs are designed for adjusting the left and right channel output indepedently, compensate for the left and right channel of all outputs and prevent the sound field positioning from deviating from the center position. Also with sensitivity knob of VU meter, easy to adjust and match better with different input signals..
  • Balanced power amp with VU meter: H7 amplifier integrated with VU meter, not only reproduces high-quality audio with excellent separation, resolution, sound field and clean background, but also dynamically decorates the listening space with strong vintage feelings when its pointer dances in the warm light..
  • HiFi clear sound and attractive appearance: support both XLR and RCA inputs compatible with most home audio device.
  • resonable circuit and concise wiring, many high-quality components are used for excellent performance.
  • custmoized grey aluminum alloy case, CNC machined with laser engraving, looks elegant and luxury..
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

レイ・アウト Ray-Out iPhone SE/5s/5 Case Disney Pop Up Book Leather Case Mickey Mouse RT-DP5SJ/MK

  • Introducing the Disney character pop-up book leather case from layout.
  • Watch out for the unique texture of Disney's popular characters.
  • In addition to the design, the lid provides full screen protection! Inside lid has pocket for IC card.
Check Stock

TONIWA 5V USB Mini Charger Compatible Leapfrog Kids Tablet LeapPad 3 / LeapPad Platinum/LeapReader/LeapPad Ultra Xdi/LeapPad Ultra Kids 5Ft Charging Cable Power Cord

  • [Product Feature] Output Max: 5V 2A 5W 9W 10W.
  • Input Volt Range: 110-240V. Exact Length: 5Ft(1.5 Meter). You Can Use Conveniently Anywhere-Traver,....
  • [Compatibility] LeapFrog Kids Tablet LeapPad 3 / LeapPad Platinum / LeapReader / LeapPad Ultra Xdi / LeapPad Ultra Kids Tablet. Please Checking It....
  • [Safety Protection] UL/CE/FCC/RoHS Certified. Build in Dynamic IC, Charger IC & Power Fuse for Short Circuit, Over Voltage Protection, Over....
  • [Warranty] Up to 365 Days Warranty Period & 30 Days Free Replacement or Refund. We Will Try Our Best to Solve Any Problem When You Meet..
  • [Package Include] 1PC High Quality AC Wall Power Rapid Charger & 1PC USB MINI Charging Cord..
Check Stock