Best Hydraulic Quick Connect

Taixin Taixinhyd Air Hydraulic Pump 10,000 PSI 10 Ton Porta Power Hydraulic Air Foot Pump Control Lift with Air Line Lubricator

  • Taxinxinhyd Air Hydraulic Pump: AIR PRESSURE IS 108-120 PSI, Max. Hydraulic Pressure is 10000PSI, Usable Oil Capacity is 42cu.in(690cu.cm), Air Inlet Size: 1/4 NPT Femal, Oil Port Size: 1/4 NPT.
  • Swivel Coupling Simplifies Hydraulic Connection And Pump Operation, Operates In All Directions For Increased Versatility In Use And Mounting.
  • Air Line Lubricator: Taixinhyd Air Hydraulic Pump has Air Line Lubricator with Quick Connect Coupler, EXTEND this AIR HYDRAULIC FOOT PUMP service lifetime and performance..
  • Durable Rugged Construction Parts Built For Long Life And Easy Operation, Fits All Standard And Long Ram Hydraulic..
  • Replaces Air Or Hydraulic Pump On Most Porta Powers.
Check Stock

Bestauto 3/4NPT Hydraulic Quick Connect 3/4body Hydraulic Coupler 20.7MPa Hydraulic Coupling Quick Connect 106L/min Hydraulic Quick Coupler (ISO 16028)

  • Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 3000 PSI, 106/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 3/4" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged....
Check Stock

Bestauto Hydraulic Quick Connect 1/2 Body with 1/2\ NPT Thread Hydraulic Coupler 4 Pairs Hydraulic Coupling Quick Connect 45.5 L/min Hydraulic Quick Coupler (ISO 16028)

  • Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged ....
Check Stock

Bestauto Skid Steer Hydraulic Quick Connect 1/2\ Body Hydraulic Coupler 1/2\ NPT Hydraulic Coupling Quick Connect 2 Pairs Hydraulic Quick Coupler 27.6 MPa (ISO 16028) (2 Pairs)

  • Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged ....
Check Stock

Titan Attachments 20 FT Economy Telescoping Hydraulic Skid Steer Truss Boom with 120-inch Reach

  • IDEAL FOR CONSTRUCTION COMPANIES: The hydraulic truss boom allows you to turn your skid steer into a mobile crane. Skid steers will enable you to move around your job site easier and fit into smaller areas than a fullsize crane..
  • 2INCH CYLINDER: The attachment is equipped with a massive hydraulic cylinder with a 2inches Bore and a 60inch stroke. We have also included the hydraulic hoses fitted with a male and female flatfaced coupler to connect the truss boom to your loader quickly..
  • HEAVYDUTY DESIGN: The Telescoping Skid Steer Truss Boom is hydraulically operated and constructed with 3 x 3inch, 5 mm thick structural steel. Allowing the boom to hold 500pounds when fully retracted and 180pounds when fully extended..
  • UNIVERSAL SKID STEER CONNECTION: Our superior design fits with almost all skid steers, loaders, and tractors such as the Ford 8n, 9n, Kubota, BX, or Kioti tractors. This kind of connection is known as SSQA, or Universal Skid steer style quick connect..
Check Stock

1/4\ NPT ISO 7241-B Hydraulic Quick Connect Couplers/Couplings w/Dust Caps,1/4” Body Size + 1/4” NPT Thread Poppet Valve

  • The hydraulic quick connect couplers with 1/4” Body Size + 1/4” NPT Thread Poppet Valve.
  • The Series B couplers are interchangeable with all ISO 7241 B series couplings,with 3600 PSI Rating, 14,500 PSI Burst Rating (Coupled).
  • Couplers have double O-rings seal for redundancy in low pressure and vacuum applications.
  • Applications:used in hydraulic applications such as automotive, electronics industries,machine tools,aerospace,mobile hydraulic and other equipments applications..
Check Stock

Dixon STMC6 Brass Hydraulic Quick-Connect Fitting, 3/4\ Male Coupling x 3/4\-14 Straight

  • Straight through quick connect male coupler for connecting directly to a hose with a male straight thread end to connect with a female straight threaded connection.
  • Straight through quick connect male coupler with a male straight threaded end.
  • Valveless construction provides maximum flow with minimum pressure drop.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability with NBR seal for high tensile strength and resistance to abrasion, tear, and compression set.
  • Used for hydraulic applications in industrial operations.
Check Stock

TEXALAN 20T 2Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 50mm Hydraulic Lifting Cylinders

  • [SIZE]: Diameter of spindle:2 inches（50mm)；Holding capacity：20T..
  • [MATERIAL]: With heavy metal structure, our hydraulic cylinder jacks are durable and can be used for a long time. Painted surface to prevent scratches and corrosion..
  • [LARGE CAPACITY]: Our ram hydraulic cylinders are designed to provide reliable support during operation. There is no card mark when lifting, large size 20 T/44000 LBS tonnage, enough stroke (50 mm/2 inches)..
  • [EASY TO USE]: The quick-connect head is equipped with a dust cover to prevent dust from entering the socket, and the connection is firm and leak-free. The structure is compact and the operation is simple. The hydraulic convex cylinder adopts smooth surface and round texture to provide reliable support during work..
  • [WIDE USE]: This hydraulic jack cylinder has the advantages of small size, suitable for narrow spaces. It is a good helper for electrical, chemical, steel, bridge, machinery and other industries as well as fitters, welders, car body, frame workshop..
Check Stock

JMCUHYD Air Hydraulic Pump 10,000 PSI 10 Ton Porta Power Hydraulic Air Foot Pump Control Lift with Air Line Lubricator Hose…

  • [ PRODUCT PARAMETER ] Maximum adjustable pressure: 10,000PSI. Input air pressure：102-120 PSI (standard shop air supply）.
  • [ CONNECTOR SIZE ] Air inlet thread--1/4” NPT, Oil outlet thread--1/4” NPT.
  • [ DURABLE OIL TANK ] Features a 98 cubic inch capacity, the reservoir is made of corrosion-free aluminum alloy..
  • [ AIR LINE LUBRICATOR ] Air Hydraulic Pump has Air Line Lubricator with Quick Connect Coupler, EXTEND this AIR HYDRAULIC FOOT PUMP service lifetime and performance..
  • [ WIDE APPLICATION ] Hydraulic dump trailer pumps are widely used in the lifting and loading and unloading of heavy machinery, automatic repairs, oil drilling platforms, and machine maintenance..
Check Stock