Best Hydraulic Cylinder Piston Cover

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

[2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
[1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
[11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
maximum length when fully extended: 17.4 inches.
adjustable range: 5.5 inches, Load capacity: 1000lbs.
Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..

Check Stock

ACDelco Professional 530-300 Premium Gas Charged Rear Shock Absorber

a hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping....
drawn over mandrel (dom) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
o-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.

Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....

Check Stock

Enerpac - RC102 RC-102 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 2.13\ Stroke

Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke.
Round body with single piston rod for use in general purpose applications in any position.
High-strength alloy steel with baked enamel finish for corrosion resistance.
10-ton cylinder capacity for lifting or pushing.
Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately).

Check Stock

The Office Oasis Chair Cylinder Replacement with Removal Tool, Standard Size

...ery office chair on the market including herman miller aeron. If it doesn't fit your specific chair, return it for a full refund and we'll even cover the cost of shipping for you..
★ EXTRA HEAVY DUTY - Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality hydraulic gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our's don't. They can even support up to 1000 lbs without fail..
★ LIFETIME WARRANTY - Our goal is to provide you with the highest quality office chair parts so you can extend the life of your chair. So if for some reason our cylinder fails, leaks, or starts sinking - email us, and we'll send you a brand new one. Our warranty has no expiration date..

Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

[Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
[Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
[Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
[Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
[One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..

Check Stock

ACDelco Professional 530-298 Premium Gas Charged Front Shock Absorber

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control. Dust Shield.
Fits: GMC- 2007 Sierra 1500 Classic, 2001-2004: Sierra 2500 HD, 1999-2006: Sierra 1500, 1999-2004: Sierra 2500.Chevrolet- 2007 Silverado 1500 Classic, 2001-2004: Silverado 2500 HD, 1999-2006: Silverado 1500, 1999-2004: Silverado 2500.

Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..

Check Stock

ACDelco Professional 530-189 Premium Gas Charged Rear Shock Absorber

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Fits: Chevrolet- 1988-2003 C3500, 1988-1999: K1500, C1500, 1988-2000: K3500, K2500, C2500. GMC- 1988-2000: K3500, K2500, GMC C3500, GMC C2500, 1988-1999: GMC K1500, GMC C1500,.

Check Stock