Best Hydraulic Couplers

Bestauto Hydraulic Quick Connect 1/2 Body with 1/2\ NPT Thread Hydraulic Coupler 4 Pairs Hydraulic Coupling Quick Connect 45.5 L/min Hydraulic Quick Coupler (ISO 16028)

Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged ....

Includes thumb, hydraulic cylinder, hydraulic hoses, mounting plate, pins, and bushings..
Hydraulicpowered retraction gives full control over load size and adds crushing strength to grip..
Heavy duty steel plasma cut for tight tolerances..
1/2" Flat face couplers and hoses included..
Thick powder coat to resist rust. | Easy to assemble and weld into place..

Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged ....

The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
Non-spill flush face valves minimize fluid losses.
Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.

...st puller attachment has a universal fit for most skid steer and tractor models, including Bobcat and Kubota. This versatile skid steer attachment lets you take on any landscaping challenge with ease. Whether you need a remover for fence posts or tree roots, this attachment tool makes it easier to get the job done..
HYDRAULIC CYLINDERS AND SINGLE HINGE PIN: The Titan Skid Steer Tree, Fence, And Post Puller Attachment is equipped with 2 x 10-inch hydraulic cylinders to power the jaws. This equipment delivers 3,000-pounds of clamping force to pull stubborn tree roots or fence posts directly from the ground. Additionally, the jaws have a single hinge pin for a strong attachment and increased durability..
INCLUDES HOSES AND FLAT-FACED COUPLERS: This attachment tool is provided with flat-faced couplers and hoses to maintain consistent pressure levels during operation. These features come together to preserve the longevity of the attachment. They also protect your landscape kit and accessories investment and allow you to accomplish more work over a more extended period..
RUGGED STEEL TEETH: This attachment has powerful reinforced steel jaws with rugged 1-inch-thick metal teeth to remove tough roots and wood fencing posts from the ground. These jaws can elimin....

Complete solution for wheel hubs and bearing services.
Adapter numbers are etched on each adapter for easy recognition.
Includes through hole ram, air/hydraulic pump, 6 foot hose with couplers, drive screw and nut.
Extensive application guide eliminates any guess work in picking out adapters and saves time.

Economical way to increase the performance and speed of wheel bearing and hub service.
Hydraulically power out the most stubborn wheel bearings quickly and easily.
Combination of air and hydraulic operation.

1530 GPM up to 3,000 PSI machine requirements..
Planetary gear drive unit delivers torque and break through power without wearing parts..
2" Hex output spindle is compatible with the most common auger bits..
6", 9", 12", 18", and 24" diameter Auger bits available. 18", 24", and 48" extensions posts available..
Drive unit weight: 122 lbs. Max Auger diameter: 24" Requirements: 1530 GPM up to 3,000 PSI Output spindle size: 2" Hex Max hydraulic back pressure: 1,500 PSI Hose length: 64" Couplers: 1/2" Flat Face (male and female).

Our Flat Face Hydraulic Quick Disconnect Coupler & Plug set features a new improved design for high flow performance and maximum service life..
3/4" NPT Thread (see diagram), 1/2" Body, These flat face couplers will couple to most models of skid steers loaders including Bobcat, Case / New Holland, Kubota, and many others.
Harden steel construction with Zinc Nickel Plating for Superior Corrosion Resistance.
Valve design that allows for a minimal pressure drops and one hand operation.