Best Hub Puller

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..

Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
Save time removing even seized-up wheel hub and bearing....
FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
This wheel bearing removal tool features all the....
DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....

Check Stock

OTC Tools 6575-2 Hub Tamer to Grappler Update Kit

Includes everything to update the previous Hub Tamer Kit to the New Hub Grappler Kit.
Included is the Hub Grappler Puller, 6 new adapters, misc. hardware and the new Hub Grappler Application Guide.

Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

[Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
[Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
[Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
[Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
[Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.

Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

[No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
[Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
[Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
Use the round plate that corresponds to the diameter of your....
[Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
Pusher washer disk driver sizes from 2.1 inches....
[Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....

Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
GM R4 and A6, HR-6, DA-6 and V A/C compressors.
sander compressors SD 505, 507, 575, 708, and 709.
Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
Check vehicle owner’s manual for a list of compatible compressors.
EASY TO USE: Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
Resists rust and corrosion with proper care and lubrication.
2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....

Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
34698 - 3ea. Pulling Jaws for internal/external use.
4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
05378 - Grip Wrench Adapter w/single lead (wrench not included).
205377 - Dent Puller, 309321 - Forcing Screw.
durable blow-molded case keeps set components contained and organized.

Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

[Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
[Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
[Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
[Built to Last] Heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
[Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....

Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

【SPECIFICALLY DESIGN】-- ①3/4'' custom drive screw, 5-10 times longer than similar designs, which with special equalizer washer provide smooth operation. ②Jaws designed and sized to property fit hub applications and is quickly located on the puller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry and storage. keeps all tool great and organized..
【SATISFACTION GUARANTEE】-- Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with This 6575 Hub Grappler Kit, simply return it for a full refund in 30 days, guarantee with 1 year’s warranty..

Check Stock