Best Hss Reduced Shank Drills

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • ...zes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

IRWIN Marples Forstner Bit, Wood Drilling, 1-Inch (1966900)

  • Drills flat-bottomed and pocket holes in significantly less time than traditional Forstner bits.
  • Features optimized ultra-sharp knife edge design specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Easily drills high-quality flat-bottomed and pocket holes with a fine, smooth finish.
  • Reduced shank fits 3/8" and larger drills and drill presses.
  • Ideal for fine woodworking, cabinet-making, and more.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ...ersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink dri....
Check Stock

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

  • Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life.
  • 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth.
  • CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
  • Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
  • Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench.
Check Stock

Frank O. Gehry: The Complete Works

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

NEIKO 10235B 13/16” Drill Bit for Metal, 1/2” Shank, Silver and Deming, 135° Split Point, High Speed Steel Drilling Bit for Metals, Wood, Plastics, Composite Materials

  • HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant..
  • 135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster..
  • 1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes..
  • CHISELED PRECISION CUT: Each of the 13/16 inch drill bits have a precision manufactured cut for accurate drilling and the all-purpose reduced shank has a 1/2-inch chiseled diameter to fit any type of drill chuck with a precise and snug fit..
  • DRILLING TYPES: This 13/16-inch silver and deming drill bit is ideal for drilling into steel, copper, aluminum, brass, wood, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, and composite materials..
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • ...teel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 coun....
Check Stock