Best Hotrunner Temperature Controller

Inkbird ITC-306A WiFi Temperature Controller, Wi-Fi Aquarium Thermostat Heater Controller 120V~1200W Temperature Control with Two Probes only for Heater Aquarium Breeding Reptiles Hatching.

  • [Dual Protection] The aquarium temperature controller is equipped with 2 relays to ensure that the power can be turned off under any circumstances, this will protect your fish from being hurt by overheated water. (US Socket Only).
  • [Two Probes] Your fish might be in danger as it is hard to know the probe is broken immediately if the temperature controller has only 1 probe. The dual probe aquarium temperature controller will alarm if the temperature difference between 2 probes is bigger than 3/5, and the INKBIRD app will push a notification at the same time..
  • [Continuous Heating Alarm] The heating time can be set according to your needs from 1 hour to 72 hours, the controller will alarm if water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0~35.0/68.0~95.0 and the detectable temperature range is -40~100/-40~212..
  • [Plug and Play] The 1100w high-power aquarium temperature controller is compatible with most kinds of heaters, you dont need to assemble the product yourself, just plug and play..
  • [APP Notification] Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the INKBIRD APP, the INKBIRD....
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Foxhymir Submersible Aquarium Heater 300W/500W Fish Tank Heater with Accurate Temperature External Digital Controller IPX8 2 Suction Cups Suitable for Saltwater and Freshwater (300W)

  • 【Automatic Constant Temperature Intelligent Heater】The heater is made of explosion-proof quartz glass material and a high-temperature resistant nickel-chromium heating wire with silicon carbide heat conduction, fast water heating, and long-lasting 2 hours heating. The protecting jacket is a high-temperature resistant PC material, which can protect the fish and plant from scalding effectively..
  • 【Visible Temperature Setting】The controller is not waterproof, please keep away from water，LED digital display screen shows the current water temperature and preset temperature. The number above the controller is the current water temperature, and the number below is the set temperature, Red light means heating, Blue lights indicate constant temperature, blue light flashing indicates the heater is not fully submersible..
  • 【Temperature Adjustment feature & Automatic Heating】Temperatures Ranges 59℉ to 93℉, The heating rod built-in thermometer, When the water temperature is lower than the set temperature, the heater will automatically heating up, and stop heating when the water temperature is consistent with the set temperature. Fahrenheit and Celsius can be converted to each other, Pressing and holding for 5 seconds change the temperature display f....
Check Stock

Foxhymir Submersible Aquarium Heater 300W/500W Fish Tank Heater with Accurate Temperature External Digital Controller IPX8 2 Suction Cups Suitable for Saltwater and Freshwater (500W)

  • 【Automatic Constant Temperature Intelligent Heater】The heater is made of explosion-proof quartz glass material and a high-temperature resistant nickel-chromium heating wire with silicon carbide heat conduction, fast water heating, and long-lasting 2 hours heating. The protecting jacket is a high-temperature resistant PC material, which can protect the fish and plant from scalding effectively..
  • 【Visible Temperature Setting】The controller is not waterproof, please keep away from water，LED digital display screen shows the current water temperature and preset temperature. The number above the controller is the current water temperature, and the number below is the set temperature, Red light means heating, Blue lights indicate constant temperature, blue light flashing indicates the heater is not fully submersible..
  • 【Temperature Adjustment feature & Automatic Heating】Temperatures Ranges 59℉ to 93℉, The heating rod built-in thermometer, When the water temperature is lower than the set temperature, the heater will automatically heating up, and stop heating when the water temperature is consistent with the set temperature. Fahrenheit and Celsius can be converted to each other, Pressing and holding for 5 seconds change the temperature display f....
Check Stock

Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed

  • ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fe....
Check Stock

Xtrasun XTC1100 LT1 Lighting Controller

  • ...troller is specifically designed for use with Xtrasun Xtdekt1 and Xtdeokt1 lighting fixtures, which use 0-10V dimming and have the proper RJ14 ports for compatibility..
  • The Lt1 controller has an intuitive, easy to use color touch screen display. Each controller incudes two temperature and humidity sensors (one for each zone), mounting hardware, All necessary cables, one external cage clamp adapter, and one power supply..
  • In addition to controlling the on/off scheduling of the light systems, The Lt1 controller offers temperature based dimming, auto shutdown for extreme temperature situations, Sunrise/Sunset simulation, and connections for external equipment such as dehumidifiers and air conditioning systems..
  • Switch, dim and boost from one centralized location easy to use Advanced color display automatic dimming for excessive temperature (user adjustable set-point) automatic shutdown for extreme temperature (user adjustable set-point) Sunrise/Sunset simulation plug and play installation.
Check Stock

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

WILLHI WH-1803B High Temperature Controller Upgraded Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control

  • 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉..
  • 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents..
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit..
  • 【High and low temperature alarm】 – Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error..
  • 【Widely Applied】 – The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat，pet breeding，incubation，HVAC equipment, accelerating germination，electric radiator, electric oven，fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc..
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL list....
Check Stock