Best Hot Knife Cutter

BISupply Electric Rope Cutter Blade Hot 30W - 932-Degrees Fahrenheit Rapid Heat Hot Knife - Synthetic Rope Cutting Tool

  • [Cut and Seal]: BISupply Heated Knife is a thermal blade that can be used to cut ribbon, fabric, plastic, or rope.
  • Hot knife rope cuts materials with a width up to 2 inches (5.1cm).
  • Hot rope cutter also seals rope as it cuts to prevent a mushroom effect and fraying.
  • [Install Anywhere]: 4 pre-drilled holes in base for permanent mounting in your garage, craft room, workshop.
  • Operate in a well-ventilated area to avoid inhaling fumes.
  • 4.75” x 4.2” x 3.1” inch (12.1cm x 10.7cm x 7.9cm) base, 2.1-inch (5.3cm) wide blade surface for finishing touches and melt fibers.
  • Includes brush with 5-inch (12.7cm) handle.
  • [Easy to Use]: Unscrew knife holder with the included T-bar hex key, place the 2 blade legs in the knife holder, tighten screws, then connect to an appropriate power connection.
  • To use, turn the power switch to the “on” position, place your material to be cut on the blade, and turn the power switch to “off” after cutting.
  • [Built to Last]: AC 120V, 60Hz, 30W power.
  • 932-degrees Fahrenheit (500°C) blade temperature.
  • Cuts and quickly heats to continuous high temperature (we recommend not leaving the hot knife cutting tool on for extended periods).
Check Stock

Foam Cutter, Jhua Hot Wire Knife Foam Cutter Electric Styrofoam Cutting Tool, 15W Foam Board Cutter with 4 inch Cutting Machine Pen for Styrofoam Foam Cutting, Arts, Crafts DIY

  • HEAT UP QUICKLY! - The hot knife foam cutter can heat the tube to 150°C/302℉ within 10 seconds..
  • ❤ NOTE: WATCH OUT FOR BURNS! KEEP AWAY FROM CHILDREN!.
  • CLEAN & SMOOTH CUTTING! - Hot wire foam cutter cuts the styrofoam smooth and fast, seals the edges clean, and leaves no debris! You can cut the form board or foam block from any angle and craft into your desired shape..
  • STRONG & DURABLE! - The cutting pen/needle/rod is sturdy & very secure in the base, cuts and shapes quickly in any direction. The hot wires can bend to the shape you want, but only once otherwise it will break..
  • EASY TO USE! - One key switch, very convenient to switch electric foam cutter on and off..
  • ❤ NOTE: Recommended continuous use hot wire foam cutter's time does not exceed 30 minutes..
  • WIDELY USE! - Ideal for low density styrofoam cutting, handmade practise, advertising words making, even kids model making. This hot pen will take you to a magical kingdom..
Check Stock

DOMINOX Foam Cutter Electric Styrofoam Hot Knife Kit Foam Board Cutter Foam Cutting Tool Heated Knife for Foam Board Insulation, Kaizen Foam, EPP, EPS, XPS, EVA, EPE, PU, KT Board, Sponge, Nylon

  • 【WIDE APPLICATIONS】: It’s recommended for short-time use occasions with small workload. Foam Cutter usually used for packaging, construction, pitched roof insulation, external wall insulation composite system. For professionals, craftsmen or DIY enthusiasts to provide better help in commercial and industrial use. Foam Cutter can cut lightweight foam, KT board, polyurethane, polyethylene, EPS, XPS, EPP, EVA, EPE, PU, polyester foam, sponge, rubber, nylon and fiber, etc..
  • 【SMOOTH OPERATION】: There is a pure copper induction coil inside the Upholstery Foam Cutter, which adopts innovative circuit design to heat fast and evenly. Upholstery Foam cutter can give you the same experience as cutting butter and bread with a knife. The cutting process is very smooth, and the cutting effect is flat and perfect..
  • 【ADJUSTABLE TEMPERATURE】: The adjustment knob on the top of the Styrofoam Cutter has 16 positions to adjust temperature and power. The wide adjustment range can meet the needs of most industries and jobs. The wider the scale on the knob, the greater the power and heat. If you can't master the temperature control temporarily, we suggest you practice several times on the foam waste (NOTICE: If the red light flashes after pressing the switch, pus....
Check Stock

Home Planet Pink Box Cutter Retractable Utility Knife - Heavy Duty Box Cutter Knife Cardboard Cutter - Box Opener Razor Blades Knife with 5 Sharp Blades

  • Easy for Weak Hands - Our retractable box cutter has a non-slip handle and comfortable grip design so people of any age or hand strength can easily slice through boxes. The ergonomic TPR rubber grip gives you a heavy duty cardboard cutter that offers good control and saves your knuckles too.
  • Slice Through Any Problem - A multi-use box cutter utility knife your razor knife will easily cut through cardboard, carpet, drywall, rope, vinyl, leather or flooring. Use our multi purpose utility knife as a work knife, carton cutter, construction knife, cardboard cutter tool, carpet knife, box opener tool, carpet cutter tool or carton box opener.
  • Easily Change with Quick Release - Swapping or reversing box cutter blades takes 3 easy steps: Simply extend your cute box cutter blade, then press the red button on your pocket utility knife, and reverse the blade or grab a new one from our convenient blade storage in the handle of your cardboard knife.
  • Strong and Lightweight - Our safe box cutter and blades retractable set has a durable zinc-alloy body with 5 reversible SK5 steel blades. Lightweight our, heavy duty utility knife only weighs 0.59 pounds and measures 6.75 inches x 3 inches so it can easily slide in and out of your back pocket.
Check Stock

Aolloa Hot Foam Cutter, 4 in 1 Foam Cutter Set With 240V / 18W Digital Voltage Controller, Hot Cutting Set ,Electric Cutting Machine Pen Tools Kit Wire, Mark Pen, For Polyethylene Styrofoam Carving

  • 4 TOOLS IN 1:With digital voltage controller, it's easier and safer for everyone to use it. 8w high power with Ul approved power supply and On / Off safety button, 12cm & 7cm wand style hot knife, 5cm bending style hot knife, 18cm bow hot blade, 10m replacement wire for bow, cutter holder. All of this hot foam cutter have light indicator and On / Off safety button, CE approved..
  • SMOOTH CUTTING & Clean: It heats up quickly, the tube will reached 150℃ within 8-15 seconds. It cuts the KT board or styrofoam smoothly cut like butter, and leaves No Debris..
  • BEST QUALITY: This foam cutting set is the most cost-effective tool. This foam cutting tool is made of high quality stainless metal and having longer service life. It is an indispensable tool for foam cutting and engraving..
  • Widely Fit MOST Types of Foam: You can cut foam from any angles and craft your own masterpiece, such as Halloween Costumes, Handmade Practice, Even Model Making Lessons by kids at school. Perfect for Eva foam, styrofoam, insulation foam, polyurethane foam, polyethylene foam, foam poster board, upholstery foam, PE foam, foam board....
Check Stock

Box Cutter Retractable Utility Knife - Heavy Duty Box Cutter Knife Cardboard Cutter - Box Opener Razor Blades Utility Knife - Box Knife Carpet Cutter with 5 Sharp Blades

  • Easy for Weak Hands - Our retractable box cutter has a non-slip handle and comfortable grip design so people of any age or hand strength can easily slice through boxes. The ergonomic TPR rubber grip gives you a heavy duty cardboard cutter that offers good control and saves your knuckles too.
  • Slice Through Any Problem - A multi-use box cutter utility knife your razor knife will easily cut through cardboard, carpet, drywall, rope, vinyl, leather or flooring. Use our multi purpose utility knife as a work knife, carton cutter, construction knife, cardboard cutter tool, carpet knife, box opener tool, carpet cutter tool or carton box opener.
  • Easily Change with Quick Release - Swapping or reversing box cutter blades takes 3 easy steps. Simply extend your cute box cutter blade, then press the red button on your pocket utility knife, and reverse the blade or grab a new one from our convenient blade storage in the handle of your cardboard knife.
  • Strong and Lightweight - Our safe box cutter and blades retractable set has a durable zinc-alloy body with 5 reversible SK5 steel blades. Lightweight, our heavy duty utility knife only weighs 0.59 pounds and measures 6.75 inches x 3 inches so it can easily slide in and out of your back pocket.
Check Stock

Sheffield Bench Mount Electric Rope Cutter H2

  • Hot knife fabric cutter kit includes heat cutter, type-R blade, and cleaning brush..
  • High-powered transformer for a quick heating.
  • Ergonomic one-hand handle , Versatile with easy to exchange blades.
Check Stock

DOMINOX Cordless Electric Hot Knife DC 18V Fabric Cutter Kit Heated Knife Rope Cutter Fabric Hot Knife Cutting Tool for Cutting Belt Webbing Fiber Cloth Rope Rubber KT Board Styrofoam EPS etc

  • 【DC CORDLESS ROPE CUTTER】: The first cordless Rope Cutter with R blade in the world. Due to its DC design, it can be used without AC power cord.....
  • 【WIDE APPLICATIONS】: It’s recommended for short-time use occasions with small workload. Hot Knife usually used for packaging, construction,....
  • 【SMOOTH OPERATION】: There is a pure copper induction coil inside the Heated Knife, which adopts innovative circuit design to heat fast and evenly.....
  • 【ADJUSTABLE TEMPERATURE】: The adjustment knob on the top of the Fabric Cutter has 16 positions to adjust temperature and power. The wide....
  • 【NICKEL-CHROMIUM ALLOY BLADE】:Rope Cutter adopts high-quality nickel-chromium alloy blades, which is not afraid of high temperatures and has a....
Check Stock

Hot Wire Foam Cutter, 4 in 1 Electric Hot Knife Foam Cutting Tool, 100-240v / 18w Styrofoam Cutter with Marker Pen

  • 【4 in 1 Cutting Pen】18w, 100-240v high power foam cutter with Ul approved power supply and On / Off safety button. 12cm & 7cm engraver tip, 5cm holing tip, 18cm hot wire tip, 10m replacement steel wire, cutter holder..
  • 【Smooth and Efficient Cutting】All hot wire foam cutter tips can heat up to a temperature of 150℃ within 10s. Great for hand DIY, you can cut foam board or foam blocks from any angle to make the shape you want. It cuts Styrofoam smoothly, seals edges cleanly, and doesn't chip!.
  • 【Practicality and Instruction】Before using, please read the instruction book in the box. Christmas, and New Year are coming. Using a marker pen to paint the patterns you want and then use a hot wire tip, holing tip, or engraver tip to cut the pattern. You can replace the tips easily according to different needs..
  • 【Safety】Overheating protection, equipped with a holder to place the heating needle, to ensure your safety and convenience. The indicators of the tool are also strictly adjusted. Children should use it under adult supervision..
Check Stock