Best Host Mp5 Module

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

AITRIP GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight 2PCS

  • GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M..
  • With a USB interface, you can directly connect it with computer. That is, with the host computer-owned serial port function, no need for external....
  • GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning....
  • Operating voltage: 3.6V-5V (or direct usb power supply).
  • Operating baud rate: 9600 (can be modified).
  • Mobile phones, camcorders and other mobile....
Check Stock

GPS Module GPS NEO-6M Ar duino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning

  • How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use..
  • ★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make....
  • GPSBaud needs to be set to 9600 instead of 4800.
  • PPS pin is not needed unless using the GPS to drive a hardware high precision clock.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock

Dog Style Volume 2

  • 2022 New Electric Splatter Cool Ball Blaster Toy (MP5 3.0) : We use high-quality materials to upgrade this electric Splatter Cool ball blaster toy.....
  • Wonderful Fully Automatic Shooting Team Game: use Coriardo automatic splatter Cool balls blaster MP5 for a wonderful battle, you will have a lot of....
  • Safe and Eco-Friendly Gel Beads (Unlimited): We configure soft gel beads. The gel beads is smooth and brittle after absorbing water, and will not....
  • User Manual (Safety Instructions): Please wear goggles when using the electric splatter blaster toy, and do not shoot at the opponent's head when....
  • Note(Special Reminder): When assembling gel splatter Cool ball blaster MP5, push the black feeder firmly along the rail. Be sure to check that the....
Check Stock

KZ AZ09 Bluetooth 5.2 Module with Mic Wireless Waterproof Ear Hook Extra Long Battery Life Bluetooth Cable for ​KZ ZST/ZSTX/ZS10/AS06/AS10/BA10/ZSR/ES4 (B pin)

  • [Free Switch Between Wired and Wireless] - KZ Bluetooth module is specially designed for Earphones with 0.75mm /0.78mm pins, making the wired headphones become wireless headphones in seconds, and getting rid of the bondage of wire harness. It allows you to switch between wired and wireless according to the needs of different scenarios. It also ensures the sound quality of the original headphones. ( *This product is only for bluetooth upgrade earhook, without earphones.).
  • [High-Fidelity Sound] - Adopting bluetooth 5.2 technology, Bluetooth Module offers you an unparalleled audio experience with faster transmission speed, stronger connection stability. At the same time, AAC advanced audio coding transmission technology to greatly improve the quality of hearing and bring natural and clear sound..
  • [Long Battery Life] - Each earbud can get 6 hours playback from a single charge. 800mAh charging case supports 7 times of recharging for both earbuds, gives up to 42 hours continuous music time. Keep your music going all day even when you go out..
  • [Double Host & High-Performance Game Mode] - Eliminate the conventional single host, dual-channel transmission, lower delay. Earhooks can be used individually. The earhook features a high performance mode that gives you ....
Check Stock

Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.

  • SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock