Best Hose Clamps For Fuel Line

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

...'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, ....

Check Stock

Spring Hose Clamp 6-22mm Spring Band Type Action Fuel Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp-100Pcs

【High Quality】These hose clamps are made of 65Mn Spring Steel. which is durable and sturdy, corrosion resistance in a humid environment, nice construction and hold very well.
【Hose Clamps Size】This hose clamp assortment include 10 different diameters clamps 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, each size 10 pieces, Fit many sizes of hoses.
【Easy to Use】The surface of clamps are polishing that can effective prevent pipe damage, using pliers to open the clamps surface, Easy to tighten since it is out away from the hose surface..
【Wide Applications】Spring hose clamps wide used for fuel lines/ vacuum hoses/ gas pipe/ air hose/ water pipe/ silicone hose, great choose for garage, boats, motorcycles, lawn and car engines connection, etc.
【Package】Total 100 Pieces fuel line clamp, come with a plastic storage box has classification figure inside, could facilitate your storage and classification size..

Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
please note that these are not for use on rigid, reinforced, or high pressure lines.
Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.

Check Stock

Fuel Line Clamp Set, Hose Pinch Pliers for Radiator, Brake, Coolant and Gas Line, Red (3 Sizes)

Hose Pinch Pliers: These flexible fuel line clamp pliers can lock into position leaving your hands free to repair.
Multi-Use: These gas line clamps are the ideal coolant, fuel, and brake line clamps tool for auto repairs at home or for professional mechanics.
Reliable Material: The fuel line pliers kit is made from durable, lightweight, non-conductive, and rust-resistant nylon.
Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
Comes With: You will receive a total of 3 brake hose clamp pliers in 3 different sizes.
please note that these are not for use on rigid, reinforced, or high-pressure lines.

Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

[Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
[Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
[ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
[Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
[Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..

Check Stock

HIAORS Gas Fuel Filter Hose Tube Line for Chinese GY6 50cc 150cc 139QMB 157QMJ Tao Tao Scooter ATV Motorcycle Parts

... Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors motorcycle snow blowers dirt bikes and just about all small engines..
【Upgraded Set】The HIDARS Package includes 9.8 Foot 1/4" ID Fuel Line.
20 x 1/3" ID Hose Clamps. Hose Clamps are made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..

Check Stock

AloneGoer 1/4″ ID Fuel Line + 1/4″ In-Line Fuel Filters + 2/5″ ID Hose Clamps Clips Compatible with Kawasaki Kohler Small Engines ATV UTV Motorcycle Snowmoble

SIZE: 1/4″ ID = ID 6mm x OD 12mm Fuel Line.
APPLICATION: Transfer petroleum products fuel lines vapor emission lines and vacuum smog control..
ADVANTAGE: The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance..
Replace fuel line of Kawasaki EZGO Polaris Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle ect. Power Equipment.
Package include: 5 feet Fuel Line Tubing + 20x Clamps Clips + 6x fuel filter.

Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..

Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.

Check Stock