Best Hose Barb Adapters

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

  • 【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
  • 【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
  • 【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..
Check Stock

Beduan Stainless Steel 1/2\ Hose Barb, 3 Way Tee T Shape Barbed Co2 Splitter Fitting

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/2”Barb x 1/2”Barb x 1/2”Barb – 12mm Barb x 12mm Barb x 12mm Barb..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Tee T Shape Barbed Co2 Splitter Fitting Pack of 2

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/4”Barb x 1/4”Barb x 1/4”Barb – 6mm Barb x 6mm Barb x 6mm Barb..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Derale 13403 Series 10000 Stacked Plate Transmission Oil Cooler 19 Row,Black

  • Built in turbulators agitate fluid for maximum heat transfer.
  • Sturdy furnace brazed all aluminum construction tested to 250 p.s.i..
  • Male -6AN aluminum O-ring inlet fittings and 3/8 inch hose barb adapters included.
Check Stock

Derale 13401 Series 10000 Stacked Plate Transmission Oil Cooler 10 Row Black

  • Built in turbulators agitate fluid for maximum heat transfer.
  • Sturdy furnace brazed all aluminum construction tested to 250 p.s.i..
  • Male -6AN aluminum O-ring inlet fittings and 3/8 inch hose barb adapters included.
Check Stock

Pin-Lock MFL Dis-connect Set with Swivel Nuts 2 5/16 Gas 1/4 Liquid Barbed by PERA

  • 1.Include: Pin Lock Gas Disconnect MFL, Pin Lock Liquid Disconnect MFL, Swivel Nuts 1/4 for Liquid, 5/16 for Gas.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Adapters.
  • 3.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 4.Connect: The 1/4 Swivel Nut Barb is on the Liquid Side and connect to the Common 1/4" Liquid Hose, The 5/16 Swivel Nut Barb is on the Gas Side and....
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

3/4'' US Standard Faucet Adapter for Misting Cooling System, Connect 1/4'' Misting Hose, Convert 3/4' Female Hose Thread to 1/4' Tubing, 2 Pcs Adapter with Washers + 1 Pcs Mist System End Plug.

  • 【3/4 Inch US Standard Faucet Adapter】These faucet adapters are made of eco-friendly plastic and are sturdy and durable. With Washers, it is tight and watertight..
  • 【Barb Design and Lock Cap】The hose adapter connects the 1/4" tubing through the barb part, and locks the tubing through the lock cap part of the adapter, so there are two protections against falling off and leakage..
  • 【Filter Accessories Prevent Clogging】The product is equipped with filter parts, which can intercept large particles of impurities in the water, effectively protect the nozzle and prevent clogging..
  • 【American Standard 3/4" Thread】Female threaded fittings are American Standard 3/4" threads, suitable for 3/4" standard threads (3/4"GHT, 3/4"NH, 3/4"NPT), a wide range of Suitable for garden connectors such as outdoor faucets, hose diverters, garden filters, garden timers..
  • 【Suitable for Many Kinds of 1/4 Inch Hose/Pipe】Suitable for many kinds of 1/4 inch pipe, suitable for 1/4 inch PE pipe, 1/4 inch (outer diameter: 7mm, inner diameter: 4mm) PVC dropper Irrigation Tube, 1/4" (OD: 6mm, ID: 4mm) PU tube..
Check Stock

1/4'' Swivel Flare Nut x 3/8'' Barb

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Connections:Hose Barb x Hose Barb x Hose Barb,3/16"x3/8"x3/16".
  • T reducing barbed fitting has three openings for connecting your hoses..
Check Stock