Best Honing Machine Water Pump

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

... This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to....

Check Stock

ASMR 8D Audio Household Sounds - Vacuum Cleaner, Blow Dryer, Washing Machine, Fan, Mixer,Blender, Air Conditioner

【 High power Car washing machine 】1. Nozzle and spray gun: High-pressure water nozzle and spray gun are the core parts of the car washing machine, which can provide high-pressure water flow to clean the dust, stains and oil stains on the surface of the vehicle..
【 High power Car washing machine 】2. Water source and pump: In order Compatible with a car wash to work properly, you need a reliable source of water and an efficient pump, which can be supplied by connecting tap water or using a bucket..
【 High power Car washing machine 】3 maintenance and maintenance: the length of the service life of the car washing machine depends on its use and maintenance factors. Therefore, the maintenance of the car washing machine should be simple and easy to operate..
【 High power Car washing machine 】4. Motor and pressure pump: motor and pressure pump is the power source of the car washing machine, need to have enough power to provide high pressure water flow..
【 High power Car washing machine 】5. Filter: Filter can be used to filter impurities and dirt in the car washing machi....

Check Stock

TDRFORCE 5 Gal Bottled Water Dispenser Pump Dispensing System 5 Gallon Water Jug Dispenser Pump Water Dilivery Automatic Electric Water Dispenser Bottle Pump Five Gallon Refrigerator Water Pump

【Drinking water pump system】TDRFORCE 5 gal bottled water dispenser pump is applicable to 5 gallon water jug, working as ideal fresh water dispenser pump for fridge, ice maker, espresso machine and countertop faucet(this item is not including a faucet)..
【Powerful function】TDRFORCE 5 gallon automatic bottled water dispenser pump provides 2.8bar (40 PSI) strong suction and 2 GPM high flow. Dry pumping protection: Automatic shut off when water drains, restart when jug refilled. Muffle working..
【Easy Installation】Assembled with 66in inlet pipe (1.8ft hard pipe in 5gal jug & 3.6ft hose connected to the pump) & 20ft outlet hose, the dispenser pump can be easily installed under counter. PS.Please installed the pump as close as possible to the machine for better pumping effect..
【Choose TDRFORCE for Warranty】As a professional manufacturer in home water pump field, TDRFORCE offers presale and after sale services and 180 days warranty. Please contact us if you have any question..
NOTICE:①Please fill water in the pump manually after long time unuse to restart the pu....

Check Stock

The Enchanted Files: Cursed

【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..

Check Stock

Promare [Blu-ray]

【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..

Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

Check Stock

Tormek T-8 Drill Bit Sharpener Kit (Tormek T-8 Original + DBS-22 Drill Bit Sharpening Attachment) also Includes: SP-650, TT-50, SE-77, PA-70, WM-200, and Tormek Handbook. (US Version)

Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, TT-50 Truing Tool, WM-200 Angle Master, SP-650 Stone Grader, DBS-22 Drill Bit Sharpening Attachment.
Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..

Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case, White

【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..

Check Stock