Best Home Automation Internet Of Things

4PCS ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller 2.4GHz Dual-Core WiFi Bluetooth Processor Integrated Chip CP2102

  • Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode..
  • The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable..
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal.
  • ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold..
Check Stock

3PCS ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller 2.4GHz Dual-Core WiFi Bluetooth Processor Integrated Chip CP2102

  • Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode..
  • The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable..
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal.
  • ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold..
Check Stock

DORHEA 6PCS ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller 2.4GHz Dual-Core WiFi Bluetooth Processor Integrated Chip CP2102

  • Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode..
  • The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable..
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal.
  • ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold..
Check Stock

Enbrighten Z-Wave Smart Rocker Light Switch with QuickFit and SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 46201

  • ...accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
  • VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON.
  • OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device.
  • FULL-HOME COVERAGE - Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150 feet. Extended signal range increases your home automation coverage to enhance your control.
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. Neutral wire required. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent....
Check Stock

TRANE ComfortLink II XL1050 , TZON1050AC52ZA

  • Wi-Fi or Ethernet connection , Control over 200 z-wave home automation devices.
  • Maintenance and filter service reminder alerts.
  • Built-in humidity sensor , Receive remote access via Internet-enabled computer , smartphone or tablet..
  • Replaces / Supersedes:  CNT06391 , CNT-6391 , ACONE950AC52ZAA and others.  Also available with Trane Logo , TZONE1050 TSTATNEXUXPROGRMTOUCH , CNT06390 , TZONE950AC52ZA , TZONE950AC52ZAA , TZONE950AC52ZAB , TZONE950.
Check Stock

Vivitar Smart Home Power Strip Multi Plug with 4 USB Ports HA-1007

  • The Vivitar wifi power strip allows to control your device from anywhere with your smartphone. All you need is a internet connection, no hub required!.
  • Four power outlets that can be individually controlled and four USB ports. Multioutlet dock works for the home, office, or travel..
  • Set timers and schedules to turn on or off your electronic devices remotely using your mobile phone. Ideal for lamps, Christmas lighting, space....
  • An energy saving, convenient solution to household automation. Get your appliance and electronics connected and experience the ease of control at just....
  • Vivtar wifi controlled smart power strip is compatible with iOS and Android devices, plus Amazon Alexa, Google Home, Google Assistant and IFTTT/Nest..
Check Stock

EVICIV 5 Inch Raspberry Pi 4 Touchscreen 800×480, Mini LCD Screen Small HDMI Monitor for IoT, Compatible with Raspberry Pi Model B-4 3B Raspbain,Ubuntu,Windows LoT,Windows 10 8 7

  • ...irtual "on screen" keyboard, so there is no need to plug in a keyboard and mouse.
  • 5 Point Capacitive Touch——Make your own "Internet of Things" (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you're ready to create your own home automation devices with touch screen capability.
  • Choice for Beginners——A range of educational software and programs available on the Raspberry Pi are touch-enabled, making learning and programming easier on the Raspberry Pi.
  • Easy to Connect & Carry—— HDMI interface for displaying, no I/Os required. Mount your Raspberry Pi on the back of the display makes it an all-in-one device, which is easy to carry in your bag.
  • Wide Application & Timely After-Sales Service——USB input makes it compatible with Raspberry Pi 4/3/2/1/3B+/BB, Banana Pi, also windows 7/8/10 and windows IoT is sopprted. Devices or systems like Retro Pi, NOOBS, Debian, Ubuntu, and Kodi are also supported. Any problems on connection, touch, quality problems please be free to contact us by the email in the manual.
Check Stock

XL1050 Trane Wi-Fi Thermostat ComfortLink™ Replaces XL950 - CNT06390 / CNT-6390

  • Wi-Fi or Ethernet connection , Control over 200 z-wave home automation devices.
  • Maintenance and filter service reminder alerts.
  • Built-in humidity sensor , Receive remote access via Internet-enabled computer , smartphone or tablet..
  • Replaces / Supersedes:  CNT06391 , CNT-6391 , ACONE950AC52ZAA and others.  Also available with Trane Logo , TZONE1050 TSTATNEXUXPROGRMTOUCH , CNT06390 , TZONE950AC52ZA , TZONE950AC52ZAA , TZONE950AC52ZAB , TZONE950.
  • Non-Returnable Thermostat , Factory Warranty.
Check Stock

American Standard Wi-Fi Thermostat AccuLink™ II XL950 - CNT06391 / CNT-6391 Replacement

  • Wi-Fi or Ethernet connection , Control over 200 z-wave home automation devices.
  • Maintenance and filter service reminder alerts.
  • Built-in humidity sensor , Receive remote access via Internet-enabled computer , smartphone or tablet..
  • Replaces / Supersedes:  CNT06391 , CNT-6391 , ACONE950AC52ZAA and others.  Also available with Trane Logo , TZONE1050 TSTATNEXUXPROGRMTOUCH , CNT06390 , TZONE950AC52ZA , TZONE950AC52ZAA , TZONE950AC52ZAB , TZONE950.
  • Non-Returnable Thermostat , Factory Warranty.
Check Stock