Best Hole Saw For Plaster

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

GoSports 6\ Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

  • CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non-binding clean edge design.
  • PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal.
  • PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more.
  • DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" or 1/2" drill.
Check Stock

HLOFIZI 2-1/8 Inch Carbide Tipped Hole Saw Multi-Material Hole Cutter for Wood, MDF, Drywall, Plaster, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 2-1/8 hole saw ideal for cutting hard wood, MDF, drywall, plaster, stucco, sheetrock. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2 inch depth of cut. Shank fits 3/8" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock

4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic Drywall Thin Metal 4.5” Hole Cutter for Drilling Holes for Lock Knobs and Vent Black

  • HIGH PERFORMANCE METIERAL: The Eliseo 4-1/2-inch hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness(≥64HRC), higher toughness....
  • EFFICIENT AND SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood, plywood, plastic, drywall, soft plaster, acrylic-board and thin metal.
  • QUICK CHANGE MANDREL---The hole saw comes with a heavy duty 7/16” hex shank quick change mandrel, fits all 1/2" chuck drills, ideal for your....
  • DIMENSIONS---Cutting Holes Diameter: 4-1/2” (114mm).
  • Package comes with 1PCS 4.5inch hole saw, 1PCS 7/16inch hole....
Check Stock

Electric Medical Cast Cutter Orthopedic Plaster Saw Sport Medicine Red FORZA4 Original

  • The basic surgical equipment can effectively cut all kinds of bandages.
  • High-speed saw blade vibration systemwill not scratch the skin for the blade rolls from left to right with the amplitude of 5.6.
  • Electric plaster saw cut the plaster by swaying the saw. During the operation, it won’t bring the scratch even the saw blade contact with patient’s skin..
  • Motor adopt the dual-insulation protecting device and it has assured the safety of both operator and patients..
  • Applications: 1.Oscillating Frequency Is Greater Than 12500 Times / Minute. Oscillating Angle 5 Degrees. 2.Low Noise Optimization Design Of Mechanical Structure And Components. 3.Alloys Saw Long-Time Use. 4.Soft Tissue Protection Function, Safe And Reliable Use. 5.Suitable For All Types Of Plaster Bandage. Especially Suitable For All Types High Polymer Bandage. 6.Our plaster saw was used in demolishing the plaster bandages, orthopedic fixation and resetting..
Check Stock

6 1/8 Inch HSS BI-Metal Hole Saw, 1 3/16 inch Cutting Depth Hole Cutter with Hex Shank Drill Bit Adapter for Wood Cornhole Boards Plastic Drywall Fiberboard Can Light Recessed Light, Red

  • WIDE APPLICATION: Our Bi metal Hole saw is perfect for cutting wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal. In addition to cutting holes for can lights or recessed lights, the Hole Saw comes in handy for home projects when working on air ducts, ceiling lights, speakers and more..
  • PROFESSIONAL MATERIAL: The 6-1/8 inch hole saw is made of HSS carbon steel & Bi-metal steel, which has superior performance and higher cutting strength than others hole saws. Built tough for repeat use and handy for working on cornhole boards and plastic..
  • SMOOTH CUTTING: he high-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength, and stronger wear resistance. Also, Built rust-proof for repeat use. It’s cutting depth is 1.2-inch..
  • CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our....
Check Stock

HLOFIZI 4-1/4\ Carbide Tipped Hole Saw for 4 Inch Recessed Lights and Dryer Vent, 4.25 Inch Hole Saws Cutting Hardwood, Drywall, Plaster, Ceiling Sheetrock, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 4-1/4 hole saw ideal for 4 inch recessed lighting, dryer vent, and cutting thick wood, drywall, plaster, sheetrock, plastic. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2 1/4 inch depth of cut. Shank fits 3/8" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4-1/4" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock