Best Hole Reamer Tool

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

KIMISS Boat Kill Switch, Single Engine Ignition Cut Off Switch with Keys 176408 Fit for Johnson BRP Evinrude Outboard

  • Non Slip: Using aluminum alloy handle, knurled cover treatment, non slip design, comfortable grip, easy to operate, light and durable punching reamer..
  • Wear Resistant: The steel reamer bit is stable and durable after heat treatment and machining, with high strength, wear resistance, good performance and long service life..
  • Widely Used: Ideal tool for RC model cars for drilling and trimming RC bodies. Suitable for different kinds of RC helicopters, airplanes, cars, boats, tanks, etc..
  • Ergonomic Design: The handle is ergonomically designed for a comfortable grip. Scissors for trimming RC car shell, compact and lightweight, the curved design of the tip makes you more effortless when using it..
  • Hole Saw Size: It can be drilled with a diameter of 0-14mm, with good toughness, no deformation, no scratches on the car shell, and a tight fit, saving your time and energy..
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Zak Designs 0204-9035 Citrus Melamine, 3.5" by 3.5", Kiwi Reamer

  • GREAT EVERYDAY KITCHEN ITEM：This Zak Designs citrus reamer is great for everyday use in the kitchen..
  • SAFE MATERIAL：This citrus reamer is made of 100% melamine material that is durable and long-lasting. It is BPA-free as well as dishwasher safe.
  • SAVE PREP TIME: The fruit reamer juices fruits quickly and efficiently, with a comfortably rounded handle and a sharp point to easily remove seeds..
  • DIY TOOL：This citrus reamer is great for lemons, limes, and other fruits when the store-bought juice just doesn’t cut it..
  • FUNCTIONAL SIZE：This citrus fruit reamer has a functional size that puts a fresh twist on making your own lemon juice! Dimensions (LxWxH): 3. 5in x 3. 5in x 7. 25in..
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...w it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

PRO BIKE TOOL Tubeless Bike Tire Repair Kit – for MTB and Road Bicycle Tires – Fix a Puncture or Flat Fast – Tackle Set Includes Storage Canister Plugger Tool and Plugs - 5 Bacon and 5 Black Strips

  • ... It’s a simple idea if your tire is leaking air, ‘ram’ a rubberised rope plug in the hole from the outside, re-inflate the tire with a bike pump or CO2 inflator. Job done.
  • Save Your Ride – When a puncture is too large for the tubeless sealant (including Slime or Stans NoTubes tire sealant), the combined tire reamer and insertion tool makes for easy plugging with a tire plug so you can quickly get back to the joy of your ride..
  • Quick and Easy Flat Repair - for Mountain, Road, Hybrid, E-Bike, Cyclocross, Gravel Bikes and ATV. Storage canister neatly includes the needle (tire reamer and insertion tool), 5 ‘Bacon’ strips (otherwise nicknamed ‘Anchovies’), 0.06 inches / 1.5mm thickness for Road tires and smaller punctures and 5 ‘Black’ strips, 0.14 inches / 3.5mm for mountain bike and hybrid tires. Plugs made from vulcanized butyl rubber..
  • Compact and Durable Storage - CNC machined aluminum storage capsule is durable and compact. Storage capsule doubles as a handle when the kit is in use. Safely store the exposed insertion needle and tire plugs in the fully sealed canister. Store the small capsule in your bike / saddle bag or hydration / backpack. Capsule dimensions (when closed): 1.1 inches / 2.8cm diameter, 3.03 inches / 7cm length. Wei....
Check Stock

Stone Carved Whale Hand Pipe - 4 / Assorted Colors

  • Made of Stainless Steel and Rosewood, The tobacco pipe cleaner cleaning Tool has elegant and classic look , easy to use and very practical. Excellent....
  • 3 in 1 Tamper, Reamer & Pick tool set, Prefect for cleaning & removing ash & other residue in the stem and shank as well as the bowl chamber..
  • Easy to use , durable, light weight and easy to carry. Weight: 1.25oz/35.44g..
  • Compact size,Portable, Overall Size: 3.31" (L) x 0.69" (W) x 0.25" (T)..
  • Package:1* (3 in 1)Tamper, Reamer & Pick tool set.
Check Stock