Best Hole Cutting Tools

Hole Saw Set, 23Pcs Hole Saw Kit with 13Pcs Saw Blades, General Purpose 3/4

[THE MOST COMPLETE HOLE SAW KIT] Our hole saw set includes 12 most common sizes of saw blades:3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2-1/8" (54mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 2 mandrels with nut, 1 Hex Key, 1 Install Plate. These tools are there to satisfy all your needs..
[DURABLE AND SAFETY] Carbon Steel, Heat Treated. High strength and hardness, design for increased durability and outstanding cutting performance. Our hole saw features a reinforced shoulder for added strength and longer life..
[EFFICIENT AND ACCURATE] High precision, smooth cutting edge. Super sharp saw teeth have been designed to cut faster, no material get stuck makes work faster and better finished..
[EASY TO SET UP] All the tools you need for quick and easy saw changing. A hex key and install plate are included for tool installation. Mandrels with 20mm nuts that can be adjusted by hand or using a spanner when greater tightness is required..
[PERFECT FOR MULTI-PURPOSE] Suitable for soft wood, plywood, oak, thin PVC board, plastic,drywall but not metal, great for tasks including cutting holes in desk surfaces, doors, furniture and cabinets.Serve for fitting handles and locks for furniture..

Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....

Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Check Stock

High Speed Steel Drill Bits Set(4 Pcs), Titanium Step Drill Bit Set with Automatic Center Punch, Multiple Hole Stepped Up Bits for DIY Lovers

10 TIMES LONGER LIFE than normal metal cutting hole cutters.
Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.

Check Stock

GJHL Drill 2-3/8 Inch 60mm Hole Saw, 1-1/4 Inch Cutting Depth HSS Bi-Metal Hole Cutter with Hex Shank Drill Bit Adapter Durable

10 TIMES LONGER LIFE than normal metal cutting hole cutters.
Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.

Check Stock

Utoolmart 95mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile 1Pcs

【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance..
【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no....
【Advantage】- Side holes allow for easy slug removal after drilling. Perfect for cutting accurate holes in a wide variety of materials such as....
【Feature】Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
【Wide Application】- Diamond hole saw drill bit can be used with a standard electric drill Cut perfect circles with these tools, Suitable for....

Check Stock

WICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch

【Various Cutting Diameter】16mm(5/8”), 22mm(7/8”), 25mm(1”), 28mm(1-3/32”), 35mm(1-3/8”), 38mm(1-1/2”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). The package contains 10pcs pilot drill bits and 2pcs L-shaped hexagon wrench. A variety of sizes to meet your different needs..
【Premium Material】- This hole saw is made from high quality tungsten carbide tipped cutters, ensures its high hardness, rust proof and wear resistance. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results..
【Fast Cutting Speed】- The spring-type guide drill can eject the chips to make the cutter body cut clean and smooth, which not only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean an....

Check Stock

HLOFIZI 4-1/4 Inch Carbide Hole Saw 4.25 Multi-Material Hole Cutter for Wood with Nails, Brick, Block, Fiber Cement, Plaster Board, Hardwood, Drywall, Professional-Grade

Up to 10x Faster Cutting - 4 1/4 hole saw with aggressive carbide tooth cuts through tougher materials faster and longer life than bi-metal hole saw.
Widely Application - Ideal for precise holes drill through lots building materials, including wood with nails, brick, concrete block, hardwood, fiber cement, older plaster, drywall, stucco. Not recommended for cutting metal sheet.
Durability - Thicker backing plate won't flex even in extreme cutting. Arbor - 7/16" Shank, fit 1/2" chuck.
Deeper Slot - Big slot design for easy and fast plug removal, cutting depth: 2-1/4 inch.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 4.25 inch hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.

Check Stock