Best Hole Cutter Tool

WICHEMI Annular Cutter Set 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Magnetic Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured..
  • ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes..
  • ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish..
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles..
  • ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection..
Check Stock

General Tools 1/2\ Grommet Tool Kit - 12 Solid Brass Grommets for Tarps Repair & 1261-4 1/2-Inch Grommet Refill, 2 Packs of 12 Sets, 24 Complete Grommet Sets

  • Product 1: CANVAS REPAIR KIT: This versatile set is used to reinforce holes and prevent tearing materials, including canvas, leather, fabric, and vinyl. Instead of replacing your possessions, repair your tarp, flag, awning, and pool or boat covers..
  • Product 1: PROFESSIONAL GROMMET KIT: Our easy-to-use set includes a hole cutter, single hardwood backer block, hardened mandrel, anvil, setting tool, and 12-1/2" brass grommets. They are solid and will never rust.
  • enjoy years of durability and performance..
  • Product 1: TARP RINGS: The anvil and setting tool are coded with lines for each size grommet, allowing you to quickly choose which eyelets you need for your project. For added comfort and safety, the appliance features a knurled body..
  • Product 1: EYELET SETTING TOOL: Choose your cloth, put the block under your item, and center the hole cutter where you're installing the grommet. Hammer to punch the hole and install. Place the grommet on the mandrel, beat it evenly, and complete your project..
  • Product 2: For use with General's 1/2" grommet kits.
Check Stock

CenPro 29A-008 - Pizza Dough Box - 4.5 Gallon Capacity

  • Professional dough proofing box, home baking accessory – complete with dough cutter and scraper tool.
  • Multipurpose – use for bread dough, pizza crust, marinating meats, storing vegetables, entertaining, parties.
  • Ideal size – 13” x 9” x 3” – universally fits on most home refrigerator shelves, fits 4-6 dough balls comfortably.
  • Leak-proof, airtight lid with convenient handle – won’t let moisture escape, important for fermentation process.
  • Dough scraper and cutter tool included, premium baking accessory, anti-slip, hanging hole, durable and handy.
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Generic Double Sided Diamond Whetstone/Blade Sharpening Stone 400 1000 Grits

  • Has double sided , provide perfect grinding by using the 400 Grit as coarse honing before the 1000 Grit as fine grinding..
  • The small ceramic rod in the middle of handle is available for grinding.
  • Tungsten steel pieces ceramic pieces the handle offer sharpening/ polishing for ..
  • Sharpens any cutter such as bread cutter, fruit cutter, cutter, best choice for chef, home using tools honing..
  • handle ensure comfortable and firm gripping during grinding, provided with the hanging hole for easy placing or storing..
  • Multifuntional, provide efficient and convenient sharpening/ polishing of and , be a multifunctional accessory tool for ..
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock