Best High torque Motors

Cordless Impact Wrench 1/2 inch, Aiment 550 Ft-lbs Max Torque(700N.m), 21V 3000RPM Brushless Power Impact Gun, 4.0Ah Li-ion Battery with Fast Charger, 6Pcs Sockets, Electric Impact Driver for Car Home

  • 【High Torque & Brushless Motor】 550ft·lb (700NM) powerful torque meets industrial-level work requirements. High-quality brushless motors provide a guarantee for high performance. The life of brushless motors is 1.5 times longer than carbon brush motor! It only takes a few seconds to loosen or tighten the car tire screws with it..
  • 【3 Gear Torque Adjustment】 You can set the most suitable torque according to different needs. Three gears, accuracy +/-5% (450Nm/ 650Nm/ 700Nm). 1/2 inch drive, it can work with different sizes of sockets. The Impact wrench set has 6 socket accessories: 18/19/21/22/23/24mm..
  • 【4.0Ah Fast-Charging Battery】4.0Ah battery=2*2.0Ah battery. Provide you with double the battery life. It only takes 2.5 hours to fully charge. The battery has a convenient power display LED indicator. You can always know when you need to charge the device..
  • 【Elaborate Design & Easy Maintenance】The belt hook on the side of the brushless wrench and the toolbox are easy to carry when working outdoors. The soft all-rubber handle can reduce fatigue during work. The brushless wrench does not generate heat or ....
Check Stock

Fielect Shaft Coupling 17mm to 17mm Bore L66x40D Flexible Coupler Joint for Servo Stepped Motor

  • 【Dimension】 - Shaft usage:17mm to 17mm/0.67" to 0.67".
  • 【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthread holding tight.
  • 【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
  • 【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
  • 【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock

Axis-Plate Dual Motor Vibration Plate Exercise Machine with Resistance Bands - 3D Whole Body Fitness Platform - Silver

  • Dual motors: Two motors allow independent or combined use of oscillating motion (seesaw / side to side) and spiral motions (up and down). The motors....
  • Best in class power: Both motors in this vibration plate machine are upgraded high-torque models for an extremely effective workout for all fitness....
  • Fast complete workout: Whether the goal is to stimulate weakened muscles, improve circulation, or get into overall better health and tone, this....
  • Resistance bands & remote control: Enhance your workout with the set of included resistance bands. These attach securely to the base, helping to....
  • Built for life: Featuring a sturdy steel frame with dent-resistant composite cover this machine is designed for durability and stability. It supports....
Check Stock

Hobbysky 6374 190KV Brushless Outrunner Motor Belt Drive Motor with Closed Cover and Hall Sensor for DIY Electric Skateboard Electric Bike Mini Scooter Surfboard (10mm Shaft)

  • ★ Fast Shipping by DHL if Purchase Two or More Motors Per Order.
  • Fast Free Shipping by DHL if Purchase One Motor and One ESC Per Order.
  • ★ ADVANCED DESIGN :The Closed Cover Enable Motors Dustproof and Waterproof.
  • ★ POWERFUL MOTIVATION: The Max Output Watt is 3600W and Not Easy to Get Hot.
  • ★ BETTER EFFICIENCY:This Motor Comes with Low KV(190RPM/V), High Torque(Max Torque is 3.57N.m),So You Can Get More Mechanical Energy Per Unit of Power.
  • ★ EASY TO INSTALL: Two Rows of Concentric Mounting Holes Allow You to Quickly Install.
Check Stock

Fielect Shaft Coupling 6mm to 10mm Bore L25xD20 Flexible Coupler Motor Connector Joint Maximum Speed 8000rpm Aluminum Alloy Silver

  • 【Dimension】 - Shaft usage:6mm to 10mm/0.24" to 0.39".
  • 【Material】 -The coupling is made of aluminum alloy, the surface is oxidized, and the type isthreaded top wire.
  • 【Features】- Connector is wear-resistant, high hardness, good responsiveness, super elastic torque can absorb vibration, suitable for large torque transmission.
  • 【Function】 -The Flexible Coupler Joint transmits torque while suppressing system vibration and adapting to misalignment to protect other components from damage.
  • 【Application】 -The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock

M6C12 EEE 150KV MAD COMPONENTS Antimatter brushless Motor for Multirotor Quadcopter Hexrcopter Drone RC DIY Hobby rig

  • ENTHUSIASTS EXTREME EDITION for extreme weight reduction while maintaining the highest possible performance. Our brand ANTIMATTER motors are defined as not “ordinary” in the multi-rotor motors field. We are proud to release ANTIMATTER series motors at the end of 2019. We spent one year to design and prove which motors are the most efficient with 21-24in props. This is the magic! MAD Components in Poland brings to the table. It is for unmanned Vehicle Aerial system (UAS, UAV, RPAS or drone)..
  • MOTOR SETUP COMPATIBILITY Mounting holes standardization 4 x M4 Ø32 mm 4 x M3 Ø25 mm.
  • EXTREMELY REDUCED WEIGHT Airy case design Passive heat dissapation Lower power consumption & Maximized performance.
  • HIGH VOLTAGE Designed for 6-12S voltage Increased torque.
  • PROPELLER INSTALLATION COMPATIBILITY multiple propeller mounting options 4 x M3 Ø12, 4 x m3 Ø18 mm,4xm3 Ø22 mm.
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock

uxcell 5mm to 8mm Bore One Diaphragm Motor Wheel Flexible Coupling Joint

  • Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
  • Material: Aluminum alloy Type: Plum shaped.
  • Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen.
  • Flexibility of coupling shaft removes stress between the motor and driving components.
  • The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.
Check Stock