Best High temperature Flux

Youland Soldering Iron Tip Cleaner + 60/40 Solder Wire Reel Fine 0.6mm Tin Lead Rosin Core (1.76oz/50g) + Soldering Rosin Flux Paste Gel (0.35oz/10g) for Electronics Metalworking Welding

  • The Sponge made from brass coils, softer than the tip plating, yet harder than the oxidation that forms on the tip. Won't damage your soldering tips. To clean the tip, just stab the iron into the holder, great alternative to a wet sponge. No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Feature of Solder Rosin Wire Core Tin —— Produced with international standard flux formula, Low melting point: 374℉ / 190℃.
  • Good activity, Stable performance, Stable performance, fast tinning.
  • fresh smell, less smoke, no toxic gases, less splashing when welding.
  • Solder joints are bright and firm, forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction.
  • low melting point high insulation resistance, reduced welding time.
  • √ Feature of Solder Rosin Flux Paste —— No-clean solder paste with minimal residue and no cleaning required. Has stable performance, non-toxic, non-irritating odor, safe and reliable use, Not corrosive to IC and PCB. Low volatility, long service life, high bonding strength, neutral pH value, strong insulation and smooth welding surface. It is an ideal auxiliary product for ma....
Check Stock

MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 15 Gram Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

  • Low temperature solder paste with non clean flux.
  • The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 μm) particle sizes.
  • Store refrigerated between 2–10 °C [35–50 °F] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use.
Check Stock

Hot Max 24000 Brazing Flux Powder 8-Ounce

  • For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
  • This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
  • Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
  • Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
  • Brazing Flux Powder comes in 8-Ounce container, Made in the USA.
Check Stock

Super Alloy 5 Aluminum Welding and Brazing Rod & Flux Kit (Starter Kit 3/32 diameter)

  • Kit includes: 1 powder flux and 7 rods (18" x 3/32").
  • 30,000 PSI: Bonds at 600° F -- half the melting point of aluminum.
  • Matching flux cleans the work area and acts as an absolute temperature guide.
  • Can be machined, drilled, tapped, threaded, plated, anodized or bent without pinholes or porosity.
  • Signature Confirmation required upon delivery.
Check Stock

MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 25 Gram Pneumatic Dispenser (Complete with Plunger & Dispensing Tip) (4902P-25G)

  • Low temperature solder paste with non clean flux.
  • The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 μm) particle sizes.
  • Store refrigerated between 2–10 °C [35–50 °F] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use.
Check Stock

City is Awake

  • Peak Power: 1, 200 Watts | RMS Power: 600 watts.
  • 2.5″ 4-Layer high temperature Copper voice Coil.
  • High Roll Foam Surround – High flux ferrite motor.
  • Frequency response: 22 Hz – 300 Hz | Sensitivity: 84.7 dB.
Check Stock

ARRMA Steel Diff Outdrive 2 EXB ARA310981

  • Peak Power: 1, 200 Watts | RMS Power: 600 watts.
  • 2.5" 4-Layer high temperature Copper voice Coil.
  • High Roll Foam Surround - High flux ferrite motor.
  • Frequency response: 22 Hz - 300 Hz | Sensitivity: 84.7 dB.
Check Stock

B2 Audio 8" Rage Subwoofer D2

  • Peak Power: 1,200 Watts | RMS Power: 600 Watts.
  • 2.5" Dual 2-ohm High Temperature 4-Layer Copper Voice Coil with Black Coating | Sensitivity: 81.8 dB.
  • Authoritative and Powerful High Flux 122 Oz. Double Stack Ferrite Magnet | Bl: 20.27 n/a.
  • Extremely Dynamic and Powerful Low End Frequency Response for Incredible Bass | Fs: 44.9 Hz.
  • Utilizes a High Roll Foam Surround Stitched to a Competition Grade Pressed Paper Cone.
Check Stock

SKUNTUGUANG 1 Pair 4.5 Inch Led Fog Light With Angel Eyes Passing Lamps DRL bulb For Motorcycle Fog Lamp Black Fog Light With Angel Eye

  • Light Color:White. Input voltage: DC 10-32 V. Work Temperature:-40~85. Luminous Flux: 1260LM.
  • 6000-6500KCool White LED Output is perfect for lighting up the road. Unique lens design allows the light to focus on the front and sides of your path.
  • Waterproof, dustproof, anti-explosion.It is safe to use on a rainy day.Please feel free to use them.
  • Fit For Electra Glide 1998-2015 Light Color:White. Input voltage: DC 10-32 V. Work Temperature:-40~85. Luminous Flux: 1260LM 6000-6500KCool White LED....
Check Stock