Best High end Performance

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Fanmusic Topping L70 Full Balanced NFCA Headphone Amplifier 4Pin XLR/4.4 Balanced/6.35mm SE Output Amp with Remote Control (Black)

  • Ultra-High Performance NFCA modules: L70 uses same NFCA (Nested Feedback Composite Amplifier) module with A90. Voltage current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance, ultra-low THD+N and absurdly high dynamic range of 146dB. Even more, high output current drive capability, ultra-low output impedance and the ultra-low noise of 0.3uV which is miles ahead of the competition provide sufficient guarantee for driving headphones with various characteristics, sO that high-fidelity music can be vividly performed on different headphones..
  • 4-Pin-XL R/4. 4mm balanced/6. 35mm SE: The L70 is compatible with common headphone jacks including: 4-pin XLR balanced, 4.4mm balanced, 6.35mm single ended, and 3.5mm single- ended. The built- in fully balanced amplifier circuit can not only fit well with balanced headphones, but also have perfect performance with single -ended headphones..
  • Compatible with almost all kinds of headphones: L70's output has high output voltage, high output current, low noise, low output impedance, sO no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones.
  • High output current allows low-sensitivity headphones to obtain....
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Proforged 104-10529 Tall Outer Tie Rod End

  • TALL TIE ROD ENDS FOR ULTIMATE PERFORMANCE. Proforged tall tie rod ends are built with a longer ball stud to reduce bump steer on lowered vehicles - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • 1,000,000 MILE WARRANTY. You can install our tall tie rod ends with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A TIE ROD END? A tie rod end (also known as a tie rod) is part of....
Check Stock

Shure SM137 Cardioid Instrument Condenser Probe Microphone with Thin Diaphragm, Class-A Preamplifier, 15db Pad for Performance Consistency, Low Self-Noise, Plus Mic Clip and Zippered Pouch (SM137-LC)

  • Ultra-thin diaphragm for smooth high end and tight, controlled low end.
  • 15dB pad for performance consistency across a wider range of high SPL sources.
  • Low self-noise and transformerless preamplifier circuitry.
  • Cardioid instrument condenser microphone offers natural sound reproduction in both acoustic and high volume performance applications.
  • Features include a thin diaphragm, a Class-A preamplifier, pad for performance consistency, and low self-noise.
  • The SM137 is a versatile, flat-response cardioid condenser probe microphone.
  • Furnished accessories include Swivel Adapter and Zippered Pouch.
Check Stock

CAPiTA Mercury Wide Snowboard Mens Sz 158cm

  • Design: Directional Twin Hybrid Rocker - This high-end all-mountain directional twin is far superior to some one-trick pony freestyle snowboard..
  • Specialty: Park/Groomers/Pow - This high-end all-mountain Directional Twin Hybrid Rocker stick is designed to do everything..
  • Quadratic Sidecut - Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style..
  • Sintered, Stone Ground Base - High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded..
  • Performance Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light..
Check Stock

HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio

  • ...compact footprint and price to match, but with sonics that outperform products many times its size. Ultra-high efficiency and low power consumption at maximum stability:4.4W per channel balance output. Embedded with HIFIMAN HIMALAYA R2R DAC- Recipient of 2022 VGP Gold Technology Award (Japan)..
  • Experience the prized performance of the R2R DAC: HIMALAYA is a discrete R2R DAC (digital-to-analog) module that is based on the FPGA algorithm. The combinations of its low audio frequency range, out-of-band noise, and low energy consumption make it a perfect match for high-performance audio equipment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS (Integrated Interface of Sound) audio interface, with a maximum resolution of 24Bit..
  • Full Balance: The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms (THD.
  • 4-level Function Switch: High Gain NOS, High Gain OS, Low Gain OS, Low Gain NOS ★Headphone Out (Front Panel): 6.35mm Single-ended.
Check Stock

CENTAURUS 4Pcs 94111 RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link Aluminum Alloy Pull Rod Compatible with Red cat Vol cano 94111 1/10 RC Car Monster Truck 62mm-75mm

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link is 100% brand new 100% testing during the manufacturing process for reliability, durability and performance..
  • 【HIGH QUALITY】CENTAURUS premium RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link is made of high quality material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS RC Turnbuckle Tie Rod Ends Steering Linkage is widely compatible with Red cat Vol ca no 94111 1/10 RC Car Monster Truck.Applicable models: 94101, 94102, 94103, 94122, 94123, 94111, 94188, 94762 94763 and also suitable for DIY model cars..
  • 【MAIN SPECIFICATION 】Adjustable Length: Approx 62mm-75mm.
  • CNC machining accuracy. Increased strength and precision..
  • 【PACKAGE & SERVICE】Package Include: 4Pcs x RC Turnbuckle Tie Rod Ends Steering Linkage .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock