Best High Viscosity

Mobil 1 0W-40, Engine Oil, 1 qt.

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
--The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..

【Precise & Credible】 The Stainless Steel Cup is made by precise mold, and the orifice is drilled using precise high-speed CNC. It's calibrated against National Institute of Standards and Technology (NIST). Therefore, you will get accurate and believable measurements with this Zahn Cup..
【Durable Viscosity Cup】Our dip viscosity cups are made of premium 304 stainless steel, corrosion-resistant and solvent-resistant, thickened cup and bottom, polished surface and smooth inside, easy to clean..
【Easy to Use】Stainless steel body with 12 inches loop handle for hand-dipping into liquid container, finger-ring is easy to maintain the cup in a vertical position during use. Clear nameplate number is convenient to distinguish various models at a glance..
【Light & Portable】The nominal capacity of the cup is 44 ml, only 79grams, very light and portable, it’s easy to carry to laboratory, factory, workshop or field etc. You could quickly check and adjust the viscosity of liquids in anywhere..
【Wide Application】 Magsoar Zahn cup is widely used in the paint industry, ideal for measure the viscosity of Newtonian or near-Newtonian liquids, such as paint, ink, dye, lacquers, varnishes, syrup and oil..

❤ 【APPLICATION】Digital rotary viscometers are widely used in the measurement of viscosity of non-Newtonian fluids such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
❤ 【FEATURES】The screen can directly display the viscosity, rotation speed, rotor number, percentage torque and other information. The full scale of the viscometer is automatically corrected according to the standard silicone oil standard value. The measurement result is accurate and reliable, and the repeatability is good..
❤ 【ROTORS】Equipped with a No. 1-4 viscometer rotors. Different rotors can be selected according to the viscosity range of different test liquids, and different speeds can be set..
❤ 【NDJ-8S】The NDJ-8S has a larger viscosity measurement range. The NDJ-5S can be selected for liquids with a small viscosity change range. The NDJ-9S is equipped with a temperature sensor for experimental projects where liquid temperature needs to be monitored at any time. The additional No. 0 rotor is suitable for liquids with a viscosity range of 0-15 mPa.s..
❤ We are the original factory of the viscometer machine, we are confident with our products. If you have any qu....

BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.

Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
Exact frictional properties provides superior performance in demanding, high torque applications.
Provides superior deposit control and protects metal surfaces from rust and corrosion.
Advanced anti-wear technology provides maximum protection to belt and pulleys.
Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.