Best High Temp Exhaust Paint

Anesty HG-02Y Heat Gun with LCD Digital Display, Variable Temperature 120°F~1200°F/50°C~650°C, 1500W Hot Air Gun with Temp-setting Memory for Fast Control

...do not unplug the heat gun until the fan stops.).
Wide Applications: The heat gun comes with 4 different nozzles, you can shrink electrical wires and bend plastic tubes with a hook nozzle.
With a deflector nozzle, the hot air tool can be used for drying, thawing, stripping paint, or softening putty.
it’s suitable for paint and sticker removal with the large concentrator nozzle.
The small concentrator nozzle can be used to loosen screws, wrap a gift basket, precise paint removal, or other DIY craft work.

✅ WHY CHOOSE POR-15 HIGH TEMPERATURE PAINT? – POR-15 High Temp paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling..
✅ TOUGH & DURABLE - Renew and protect metal surfaces subject to extreme heat. Our high temperature paint provides a tough corrosion resistant finish that protects against weather, salt, and moisture..
✅ APPLICATION - All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint & any other matter. Paint all bare areas with two coats. Glossy surfaces should be roughened with 320 grit sandpaper before recoating. Allow POR-15 High Temp Coating to cure for 24 hours on the surface before temperature is raised above 300°F for full cure..
✅ WHEN DO I NEED THIS? - POR-15 Heat Resistant Paint is the most uniform heat-resistant coating available anywhere and will maintain rich, brilliant colors without burning off or discoloring. Can be used on all cars, domestic or foreign. Meets or exceeds properties and requirements of MIL-C-13370..

Designed to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt.
Dual-layer design, using a combination of hi-temp glass fiber, for long term durability.
Maintains high heat protection while offering superior abrasion and impact protection.
1.5-inch width makes it easy to install on any type of header, exhaust pipe or exhaust system.
The stainless steel exoskeleton locks together when overlapped keeping the wrap tight.

Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
Most efficient at providing horsepower gain from idle to mid-range RPM.
Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press.
All joints TIG welded for great resistance against cracking and wearing.
Hi-temp paint that holds up to 500C or 932F.

◆【ATTENTION】:The heat gun will emit white smoke in a short time after starting up,which is a normal phenomenon.It can operate in US 110/120V 60hz.The basic model can only use two gears temp to control the temperature, without back cover adjustment and digital display function.
◆【1500W 2 Gears Temp Setting】: Low temp: 572ᵒF（300℃）,350L/Min,High temp: 1022℉（550℃）,500L/Min,The Hot Air Gun heating in seconds easily to help complete DIY household home improvement tasks, please pay attention to safety when using it..
◆【FREE- HANDS OPERATION】: The design of Rear Cover Flat and bracket is ideal for stand by itself upright to free hands.
◆【10 VERSATILE ACCESSORIES& Wide Applications】: Heat Air Gun come with 10 multi-purpose attachments,includes 5 nozzles,1 paint shovel,4paint shovel attachments.Attachments meet different application needs.Great for shrink wrapping,epoxy resin,shrink tubing,crafts,cell phone repairs,vinyl wrap,thawing pipes,paint removal,electronics repair..
◆【CONFIDENT WITH PRODUCTS QUALTY】:Any of your sincere feedback for heat gun are welcomed.And we will try our best to solve it.Additionally,you also can choose REPLACEMENT TOOL or REFUNDING.

Exhaust Pipe paint withstand temperature up to 1200 °F / 649 °C.
Specially formulated to brighten and customize your exhaust pipe with durable coating feature to protect against exposure to excessive heat.
Easy-to-use paint comes with everything you need include prevent rust, corrosion, chipping, brake dust, and automotive chemical and it is also best on all High Heat surfaces..

A stainless steel performance muffler at an economical price.
409 Stainless Steel construction for superior corrosion resistance and good looks.
Interior construction features high-temp interior sound absorption material delivering a deeper, mellow exhaust tone.
Perforated High-Flow straight-through tube design for increased exhaust flow.
Moderate increase in interior tone over most OE mufflers.

These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.