Best High Temp 3d Printer

JG MAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% ABS PLA PETG TPU Flexible 1.75mm (Artist-D 3D Printer)

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc..
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print..
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame ....
Check Stock

JAYO 3D Printer PLA Filament 1.75mm，Dimensional Accuracy +/- 0.02mm, 3D Printing Material fit for FDM Printers (PLA Bk)

  • 【Accuracy & Consistency】JAYO 3D printer PLA filament are produced with high precise specification. Dimensional Accuracy 1.75mm + / - 0.02 mm. No bubbles, no clogging, low odor,low warping to ensure smooth and stable prints.3D Filament enriches your imaginary world..
  • 【Tangle Free】During JAYO 1.75mm PLA filaments production,we provide the full mechanical winding and manual examination, Making the PLA spool filament easy to be fed. Please insert free end of filament into spool holes to avoid being tangled for next use..
  • 【Print Parameter】Our PLA filament recommended extrusion temperature 200°C - 230°C, Heated Bed Temp: 60°C - 80°C. Melt index: 7-9g/min.Precise 3D print parameters remove your printing confusion and worry..
  • 【Wide Compatibility】With thousands tons of filaments output each month and years' of 3D printing filament research and develop experience. Makes JAYO filament harmonizes perfectly with all common 1.75mm FDM 3D printers. Such as SUNLU S8, S8 Pro, Ender series, Mega series etc..
  • 【Package & Warranty】Vacuumed sealed package keeps our 3D printer filaments at an optimal storage condition.No dust, no dirt before opening.After sales service: fast and effective 24x7 professional customer support, assistance of the product eng....
Check Stock

SUNLU White PETG Filament 1.75mm 1kg/Spool PETG 3D Printing Filament 1.75 +/- 0.02 mm for FDM Printer 3D Pen

  • 【What you get】SUNLU White PETG 3D Printer Filament 1.75mm 1kg (2.2lbs)/spool.
  • 【Recommend Settings】PETG Filament Extrusion/Nozzle Temperature 200-220°C (heating plate temp. at 60-80°C)can give you smooth prints which....
  • 【Easy to print&No clogging】High purity with low shrinkage, SUNLU PETG 1.75mm filament has the advantage of Good toughness&High hardness&Zero....
  • 【Professional Vacuumed Sealed Packaging】This will enable you to easily keep your PETG 3D printer filaments at an optimal storage condition and....
  • 【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU PETG 1.75 filament, don't....
Check Stock

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm

  • ..., with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with dual extruder, and the print size is 330×250×320mm..
  • 【Excellent user experience, large UI interface】It’s equipped with self-developed QIDI slicing software, tw....
Check Stock

PLA 3D Printer Filament, JAYO PLA Clear Filament 1.75 mm, Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA Transparent

  • Performance Advantages: PLA Filament Superb Layer Bonding High Rigidity, Good Glossiness, No Cracking or Brittle Problem..
  • Material: PLA(Polylactic Acid) - Weight: 1 KG (approximately 2.20 lbs) Spool.
  • Pack: PLA 3D Printer Filament Vacuumed Sealed With Desiccant..
  • Recommended Printing Temp: 210-220°C - Base Plate Temp: 50-60°C.
  • Size: 1.75mm (Tolerance Level : ± 0.02mm) - Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.2".
Check Stock

ATARAXIA ART Flexible PLA Filament, PLA 1.75mm, 3D Printer Filament,1kg/2.2lb, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, with Filament Storage Bag, PLA Sky Blue

  • ...a & 89A Shore Hardness】 - Ataraxia Art Flexible PLA plus filament is a patented formula that took years to perfect & release. Flex PLA is more flexible than TPU & easier to use. Flexible Pla elongated at break more than is 500-600 % so Flexy filament can be stretch 5 to 6 times higher more than any 3d printer filaments.3d printer filament Flexible PLA is used for great variety of project like shoe insoles, Arts & Crafts, DIY, phone case, gifts, belt & decoration..
  • ☀ [ Wide Pantone Match Colors Option For Flexible Stretch PLA] - Ataraxia art offer Flexible PLA Plus Filament 1.75mm in Auto winding 1kg./2.2lb spool, . Ataraxia FPLA is also available in the following Pantone Matched colors: Red, Black, Yellow, Gold, Violet, White, ivory white, Blue, sky Blue, Green, prusa Orange, Light Brown, Brown, Slate Gray, Pink & chocolate. To match exact color code please refer our Pantone code in our product image..
  • ☀ 【 Compatible with Bowden Extruder and Direct Drive 】- Ataraxia Flexible PLA Filament 1.75mm Works with any 3dprinter, regardless of it being direct drive or Bowden extruders. TPU filament 1.75mm on the other hand will not work with ....
Check Stock

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

3D Printer Filament - 1KG(2.2lb) 3 mm, Dimensional Accuracy PLA Multiple Color (Black, 3mm)

  • 1 KG (approximately 2.20 lbs) Spool. 3.00mm Filament Diameter about 115m (Dimensional Accuracy +/- 0.05mm)..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

EIBOS 3D Printer Filament Dryer Box 3D Filament Storages with Fan Keeping Filaments Dry During 3D Printing Compatible with 2 Rolls 1.75mm 2.85mm 3.00mm PLA PETG ABS Spool Holder

  • 【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a....
  • 【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are....
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】filament dryer box works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D....
  • 【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new....
  • 【100W PTC HEATER】Different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more....
Check Stock