Best High Pressure Oil Pipe

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).

Check Stock

VEVOR Air Hydraulic Pump, 10,000 PSI Hydraulic Foot Pump, 1/2 Gal Reservoir Foot Operated Air/Hydraulic Pump, with Hose and Spray Gun for Heavy Machinery Rigging, Auto Repair, Auto Body Frame Machines

Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, which can be used for all 10-ton applications. Output oil hole: 3/8NPTF connection.
Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, which is able to save the operator's time and effort with strong power and high output pressure..
Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality plastic shell to handle tough industrial applications. 2.3L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil..
Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 6.56 ft/200 cm high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included..
10,000 PSI for Wide Application: This hydraulic pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single-acting ram applications. It is a great unit for use wi....

Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.

Check Stock

Rule Evacuator 8000-High Capacity Submersible 12 Volt DC Utility Pump (Yellow/Black)

Manual hydraulic water pressure test pipeline tester..
Suitable for water,or hydraulic oil as a medium,for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy,to provide the required pressure.
for chemical, construction, plumbing, oil,coal, Shipbuilding and other industries..
Normal tap water pressure of 0.3MPa,high-rise residential 0.4MPa,water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa.(Tap water 0.1MPa 1KG pressure).

Check Stock

MULMART High Pressure Hand Pump 4 Stage, PCP Hand Pump 4500PSI for Air Rifle,Airgun,Scuba Tank,Paintball,Filling Tire,Hand Air Pump 40MPA

【HIGH QUALITY MATERIAL】- The first grade pipe of the high pressure hand pump is made of stainless steel and the second grade pipe of the pcp air pump is made of aluminum-magnesium alloy which has the characteristic of high hardness and lightness. It can reduce friction when you pull the air hand pump..
【NEW DESIGN】- Compared with the traditional 3-stage hand pump pcp, the 4-stage airgun pcp pump has great advantages: it can save at least 25% of the force and lighter than a 3-stage pump. And it carries with various connectors, easy to use..
【EASY-TO-READ PARAMETER】- The pressure gauge is made of high quality stainless steel, the measure range of which is 0-6000Psi and working pressure is 0-4500Psi. Accurate display, explosion-proof pressure protection, safe and assured..
【WATER-OIL SEPERATE FUNCTION】- Built-in double-deck oil and water separation tool, Made of aluminum alloy, Internal use of imported filter element, well filtration, the air is pure and breathable. It can reach 90 percent effect of water and oil separation, and it can be used over and over again..
【WIDE APPLICATION】- The air hand pump can be applied in various occasions. For example, most PCP pistols, rifles and air guns, soccer, inflatable boat, cars and etc..

Check Stock

10/2 with Ground Flat Yellow Submersible Well Pump Cable 600V (125FT)

Manual hydraulic water pressure test pipeline tester.Fine workmanship and good performance. Easy to use. Durable in use..
Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure.
for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries..
Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. ..
Long working life, It is smooth operation, high efficiency, good performance. Small volume, low noise..
Our small pump is designed with a mini size and light weight, it is easy and convenient to use..

Check Stock

Conair CompleteSteam 1100 Watt Handheld Fabric Garment Steamer, All White

1700W HIGH POWER - Put the water inlet pipe in a bucket, turn on the switch and hold the trigger of steam gun. Fast steams out only need 15 seconds. No built-in water tank design makes the steamer lightweight to carry and don't have to constantly refill the tank..
HIGH TEMPERATURE STEAM - Through the high-pressure high-temperature steam and strong spray force, the cleaning job is done perfectly. Easy to achieve natural oil removal, remove stains quickly and strongly, create a clean and comfortable living space..
HIGH PRESSURE STEAM - Our hand-held pressurized steam cleaner can release about 3~5 BAR of high pressure steam, which is equivalent to 6~10 kg of pressure acting on 1 cm^2, easily spraying oil, dust, stains and so on..
360º CHEMICAL FREE CLEANING - Our steam cleaning machine features extended 2.5m steam pipe and extended elbow nozzle that combine high-temperature steam to penetrate deep into the corners of the gap for easy cleaning..
WITH STEAM HUMIDITY ADJUSTMENT - There is a Knob that can controll the water inlet, to reach different steam water content. Equipped with 1.2m silicone water inlet pipe and no water tank built-in..
PRODUCT WARRANTY & FREE PARTS REPLACEMENT - If you find any parts are damaged after receiving product, just contact us, ....

Check Stock

Rustic State Industrial Pipe Wall Bracket Rust Oil Free 10 Inch Black Set of 2

PIPE Type: black pipe 3/4" x 5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application.
PIPE SPECS: black coated schedule 40, 150 PSI.
PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air.
HIGH QUALITY: durable pipe steel materials manufactured using advanced technology.
RATING APPROVALS: meets ASTM standards and NSI technical specification.
EXTRA PROTECTION: shipped with plastic end caps to prevent pipe thread damage for the duration of transport.
DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture, shelves and accessories..

Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.

Check Stock