Best High Pressure Fuel Tube

2.6 Gallon Metal Tank, Jerry Can - (10L Green)

...ry strong and durable. The portable filler tube is made of professional PET material, which has excellent corrosion resistance and fuel resistance, and can be freely bent, making it easier and faster to refuel..
【With safety vent and labor-saving handle】 The 2.6 gallon gas can has a vent hole to prevent negative pressure from flowing backwards, and the vent hole improves the liquid transfer efficiency! The handle is easy to lift and you can easily add fuel. Save time and effort when refueling. It is very convenient to carry in the car for emergency rescue..
【Easy and safe to use】The oil filling pipe is equipped with a filter, which can effectively filter impurities or foreign objects, etc., making the oil safer. Safety screw air release valve, anti-corrosion, anti-rust, anti-aging..
【Multipurpose Gasoline Bucket】The gasoline bucket is suitable for motorcycles, cars, SUVs, UTVs, ATV boat trailers or other vehicles. Suitable for diesel, gasoline, motor oil and other fuels..

Check Stock

SunStar Propane Heater Infrared Positive Pressure Straight Tube, 175000 Btu 40L

...r. LOW MAINTENANCE: No ceramic parts to break, or replace. Not thermocouples to replace. Emitter tubes do not glow cherry red, therefore are not fatigued to the point of premature failure..
HIGH OUTPUT SERIES. PH-40 HO.28,000 – 40,000 BTU.10′ heater approximately 12′ x 12′ area mounted 8 to 12 foot high.
Gas Pressure at Manifold: Natural Gas – 3.5″ W.C. / L.P. Gas – 10.5″ W.C..
Gas Connection Size – 0.5″ N.PGas.T. 1/2″.
Gas Inlet Pressure: Minimum Maximum Natural 4.5″ W.C. 14.0″ W.C. L.P. 11.5 W.C. 14.0 W.C..

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....

Check Stock

ACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose

Nitrile tube that is spiral reinforced for enhanced durability.
NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 34 in I.D. at ambient temperatures.
Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

Check Stock

ACDelco Professional 32102 25 ft Bulk Reel of 1/4 in Fuel Line/PCV/EEC Hose

Nitrile tube that is spiral reinforced for enhanced durability.
NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
Vacuum rating of 24 in/Hg for sizes less than 1?2 in I.D., and 10 in/Hg for sizes 1?2 in to 3?4 in I.D. at ambient temperatures.
Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

Check Stock

ACDelco Professional 32104 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose

Nitrile tube that is spiral reinforced for enhanced durability.
NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures.
Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

...diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are ma....

Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..

Check Stock