Best High Power Diode Laser

Hilitchi 40Pcs Mini Laser Dot Diode Module Head WL Red 650nm 6mm 5V 5mW and 3V 5mW and Light Dependent Resistor LDR Sensor 5 mm GM5539 5539

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
  • Can be used to connect diode tubes for multiple use.
Check Stock

Bosch GLL3-300-RT 360 Degrees Three-Plane Leveling and Alignment-Line Laser (Renewed)

  • ALL-IN-ONE: The Bosch GLL3-300 Three-Plane Leveling and Alignment-Line Laser is both a complete level as well as an alignment laser. The GLL3-300 quickly arranges and squares room layout with three chalk lines in 360° laser planes, one horizontal and two vertical.
  • VISIBILITY: With Bosch’s built-in VisiMax technology, the GLL3-300 monitors power consumption to maximize line visibility and extend overall battery life of the line laser. The upgraded diode delivers a brighter beam and a visible range up to 200 Ft. diameter..
  • EXTENDED: The GLL3-300 offers pulse mode to extend the working range up to 300 Ft. diameter and/or in bright lighting, using an optional LR8 or LR6 receiver.
Check Stock

HiLetgo 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock

Quarton Economical 3D-Scanner Line Laser Module VLM-650-41 LPT30-D60 (Fan Angle : 60°)

  • This module has integrated quartz cylindrical lens, collimating lens, laser diode, and APC driver circuit..
  • APC circuit to provide maximum stable laser output power..
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and F1 Honeycomb Working Table, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

  • Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
  • Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
  • More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
  • Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock