Best High Heat Resistant Pi

UCTRONICS for Raspberry Pi 4 Dual Fan, Pi 4 Cooling Fan with Heatsink, Dual Fan Kit for Raspberry Pi 4 Model B

Specially suitable for the Raspberry Pi 4 Model B --- One dual cooling fan(50*25*13mm), one thermal tape(50*25*1mm) and two heatsinks(9*9*5mm), perfectly fit to the CPU and the other chips of the Raspberry Pi 4 Model B..
High speed and low noise --- The DC 5V dual cooling fan run quietly at high speed, effectively get rid of the noise..
Efficient heat dissipation --- The dual fan can be close to the heating chips for efficient heat dissipation with the thermal tape (It can stick the cooling fan with Raspberry Pi stably)..
Aluminum alloy material --- High quality aluminum material improves efficient heat dissipation, tough and durable..
Easy to install --- Remove the plastic film on the upper layer of the thermal tape and then stick the thermal tape to the bottom of the dual fan. Put the dual fan on the Raspberry Pi 4 Model B motherboard, then connect the red cable to the second pin, connect the black cable to the third pin. Stick the two heatsinks to the capacitance chip and the LAN chip..

Check Stock

Geekworm Raspberry Pi 4 Case, Pi 4 Heatsink Case, Raspberry Pi 4 Aluminum Passive Cooling Case with Heatsink Pillar for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only (P232)

New version Raspberry Pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 2GB 4GB 8GB version.
Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink..
Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable and TF card slot reserved..
Made of high quality aluminum material. With 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption..
Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Check Stock

GeeekPi Raspberry Pi 4 Case, Raspberry Pi 4 Case with Fan 40x40X10mm (Blue Backlight) and 4pcs Raspberry Pi 4 Heatsinks for Raspberry Pi 4 Model B (Blue&Clear)

Super Quiet 4010 Fan with Blue Backlight (Fan size:40x40x10mm).
With cooling fan for heat dissipation of Raspberry Pi.
Includes heatsinks for better heat dissipation.
High quality clear acrylic and blue ABS material.
Access to all ports of Raspberry Pi board.
Package Includes:1 x Blue ABS Acrylic case for Raspberry Pi 4B ,1 x 4010 Fan with blue backlight pack ,1 x Screw driver ,4 x Aluminum heat sinks ,1 x Instructions.

Check Stock

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
Reserve the TF Card slot for easy access..
Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Check Stock

Orange Pi 3 LTS Allwinner H6 2GB LPDDR3 8GB EMMC Flash Quad Core 64 Bit Single Board Computer 5V3A Type-C Support Android 9.0, Ubuntu, Debian Mini PC (PI3 LTS+ Type-C Power Supply+Al Heat Sink+case)

Orange Pi 3 LTS open source board adopts Allwinner quad core 64 bit A53 high-performance processor, integrated 3.5mm audio port, TF card storage, HDMI2.0a output, power management, infrared reception, USB2.0/3.0 interface, LED indicator, support Gigabit Ethernet. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
Orange PI3 LTS 2G8G EMMC Flash H6 1*USB3.0 Support Android 9.0, Ubuntu, Debian Single Board Computer.
Orange Pi 5V3A US Type-C Power Supply, with Super Secure Protective.
Orange Pi Aluminum Heat Sink+Orange Pi 3 LTS Board ABS Black Case.
Include: PI3 LTS Single Board Computer+ Type-C Power Supply+Al Heat Sink+Case.
Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon service..

Check Stock

for Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Mini Cooling Fan and Heatsink, 480x320 Resolution 60fps Monitor LCD Display

The 3.5 inch Touch display compatible with Raspberry pi 4 Case, better image performance, support Raspbian Buster System.The screen board design with Power Pin support connect with fan..
Come with mini cooling fan and heat sink make sure your pi works stable, achieve the best heat dissipation, no need to worry about heat dissipation..
Display resolution is 480*320, The raspberry pi display support 125MHz SPI signal input, it can display stable without flicker. When it work with raspberry pi, the refresh rate is about 60FPS, it is enough to play the video and game..
Protecting your screen and pi, the split design is easier to install and has good ventilation, with copper balance column to help screen maintain balance.(No include Raspberry Pi).
For detailed usage tutorials, system burning and driver installation, please refer to the user manual on the detailed description page..

Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.

Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes heatsinks for cooling down your Raspberry Pi better..
The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.

Check Stock

Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black (P252)

Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.

Check Stock