Best High Flow Muffler Silencer

Tesla Aftermarket

  • ✔*** Please check this size of the muffler ( 2nd Spec pictures ) and compare the size to the installation location for fitment ***.
  • ✔CAUTION: Due to installation to weld-on the muffler, an extended piping might be required and charged my your mechanic..
  • ✔THIS PRODUCT RECOMMENDS PROFESSIONAL INSTALLATION. Any damage during installation will not be refunded.
  • ✔The muffler provides a deep and smooth tone and Made From High Quality T-304 stainless steel.
  • ✔Package includes: 1 x Exhaust Muffler.
Check Stock

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • integrated design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
Check Stock

DNA MOTORING CBE-NM04V6-D-NRT Stainless Steel Cat Back Exhaust System [Compatible with 04-08 Maxima]

  • 【FITMENT】Compatible with 04-08 Maxima.
  • 【Quality Construction】Made of High Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(OD) Muffler Tip / 2. 5"(ID) Inlet / Removable Silencer Included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Buick Auto Interchange Manual 1927-1935

  • ✔*** Please check this size of the muffler ( 2nd Spec pictures ) and compare the size to the installation location for fitment ***.
  • ✔CAUTION: Due to installation to weld-on the muffler, an extended piping might be required and charged my your mechanic. Please DO NOT purchase if....
  • ✔THIS PRODUCT RECOMMENDS PROFESSIONAL INSTALLATION. Any damage during installation will not be refunded.
  • ✔The muffler provides a deep and smooth tone and Made From High Quality T-304 stainless steel.
  • ✔Package includes: 1 x Exhaust Muffler.
Check Stock

DNA Motoring CBE-AI942RS-BT CBEAI942RSBT Stainless Steel Catback Exhaust System

  • Made of high quality T-304 Stainless Steel..
  • TIG welded CNC machine flange for resistance against pressure and corrosion..
  • Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow..
  • Muffler tip type: rounded tip/ tip diameter: 4"/ inlet/ outlet size: 2.5"/ removable silencer included.
Check Stock

Truck Exhaust Kits - Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler 2.5" Black Slash Cut Weld on Tip

  • Vehicle Compatibility - This cat-back exhaust is compatible with Honda Civic Coupe Sedan 1992-1995, Honda Civic EX 1996-2000, does NOT fit hatchback models..
  • Brilliant Performance - Come with [1] high performance racing design exit cat-back exhaust kit, can increase 15 to 25 horsepower instantly or low end torque and maximize to enhance the exhaust gas flow without sacrificing the aggressive tone sound in the smooth conditions..
  • Extraordinary Quality - It is constructed of high quality aluminized steel with computerized mandrel-bends for the strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion..
  • Simple Installation - Easy for the installation, make you enjoy the best performance in the fastest time..
  • Product Specification - Major Piping: 2.5" OD | Muffler Exhaust Tip (Removable Silencer Included): 4.5" OD | Inlet: 2.25" OD | Muffler Tip Type: Round.
Check Stock

Mtsooning 10PCS Pneumatic Muffler, 0.37inch Brass Flow Control Silencer, Sintered Air Controller for Cylinders Solenoid Valves Crank Cases Gear Boxes Oil Tanks

  • SIZE AND MATERIAL: The diameter of male thread is 0.37inch / 9.5mm.This pneumatic muffler is made of high-quality brass material, resistant to high pressure, sturdy and durable, and has a long service life..
  • FUNCTION: Pneumatic muffler silencers are mainly for reducing dynamic noise or cleaning the exhaust air for pneumatic air solenoid valve..
  • APPLICATION: Slicencers are widely used for cylinders, air cylinders, solenoid valves, crank cases, gear boxes, oil tanks, pneumatic tools..
  • INSTALLATION: This brass flow control silencer is easy to install and konck down..
  • THE BEST AFTER-SALES GUARNTEE SERVICE: When you receive these sintered air controllers, the size is not suitable or too small, or the product is damaged.
  • please contact us in time, we will give you a refund or resend..
Check Stock

DNA MOTORING CBE-HC06SI-BT Stainless Steel Cat Back Exhaust System [Compatible with 06-11 Honda Civic EX 1.8L]

  • 【FITMENT】Compatible with 2006-2011 Honda Civic EX 1.8L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Muffler tip type: dual rounded tip/ tip diameter: 4"/ inlet/ outlet size: 3"/ removable silencer included/ O2 sensor bung insertion.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

2pcs 45mm Black Stainless Steel Motorcycle Exhaust Can Muffler Insert Baffle Adjustable

  • 【Adjustable & Removable】Universal muffler removable silencer for motorcycles..
  • 【Universal Muffler】Motorcycle Exhaust Pipe Muffler can reduce sound. Quietly silenced, the bass is cut..
  • 【Applicable size】Fit 44- 46 mm Round Tip Mufflers. Outlet Diameter: 45 mm / 1.77 inch.
  • 【Durable Material】Motorcycle Exhaust Pipe Muffler is made of high strength stainless steel, very durable..
  • 【Fitment】for installation on the exhaust pipe tail exhaust pipe diameter size of 45 mm,if you don't know your exhaust pipe dia,please measure it..
Check Stock