Best Hiccreality Cr 10

HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality 3D Printer CR-10 CR-10 mini CR-10S 3D Printer Replacement Parts

Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work..
2 Durable Quality: plug and play cr-10 hotend assembly with high quality..
3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers.
4 Stable Material: Aluminum, stainless steel, brass and MK8 nozzle.
5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans..

Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
100% brand new and original Creality exturder. If you have any question, please feel free to contact us..

Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

HICTOP Heated Bed for 3D Printers (310 * 310mm, 12V)

It is compatible with Creality CR-10 / CR-10S 3D printers.
Hotbed cable and Insulation Mat are included in this package.

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

Aluminum 3D Printer Parts Filament Break Module Detector Sensor Run Out Pause Monitor for Creality CR-10 V3 V2 / SV03 / CR-10S Pro V2 / CR10 Max/Ender 3 Max/Ender-6 /CR-3040 Pro (Filament Sensor)

This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful..
Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
Precise Detection: Blue LED indicates normal filament feed-in.
Blue LED turns off when filament runs out..
Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer.

Check Stock

HICTOP All Metal Extruder Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

[UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
[REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5..
[Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame.
[EASY OPERATION]: DIY kit and you need to assemble by yourself..
[SERVICE COMMITMENTS]: We offer 1 YEAR Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back..

Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..

Check Stock