Best Hex Coupling

Wiha 77790 14 Piece Ultra Driver 26-in-1 Bit Holder Set

  • Set Includes: Slotted: 3.0x4.5, 5.5x6.5mm | Phillips: #1x2, #0x3 | Square: #1x2, #0x3 | Pozidriv: #1x2 | TORX: T10xT15, T20xT25 | Hex Inch: 1/8x9/64, 5/32x3/16” | Hex Metric: 3.0x4.0, 5.0x6.0mm.
  • Includes 13 double-ended insert bits for 26 driver tip profiles.
  • Spring driven pop up cartridge for fast bit selection.
  • Locking bit collar with quick release for secure bit coupling.
  • Ergonomic cushion grip handle for comfort and control.
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

Air Hose Fittings 1/4" Air Coupler & Plug Kit,36 Pieces Quick Connect Air Compressor Accessories W/Storage Case

  • Industrial type, also known as M/D type, compatible with industrial/M/D type air fittings.
  • Used for a variety of air tools such as air compressors, air blow guns, air nailers etc..
  • 1/4 inch NPT thread × 1/4 inch body size, interchangeable with most manufacturers.
  • Kit includes 10pcs Male Plugs, 10pcs Female Plugs, 4pcs Female Couplers, 4pcs Male Couplers, 4pcs Male Hex Nipple, 4pcs Female Hex Coupling..
  • Customer Satisfaction Guarantee: 30-day return guarantee is provided..
Check Stock

Dixon Air King AB8 Brass Air Hose Fitting, Universal Coupling, 3/4\ NPT Female

  • Air King universal coupling female NPT end.
Check Stock

Hard-to-Find Fastener 014973209582 Coupling Nuts, 6-32, Piece-8

  • 8 Pack 1/4-20 X 7/8" Long Hex Coupling Nut with Zinc Plate NCUP004C000STLZN.
Check Stock

The Hillman Group 45132 1/4-20-Inch Stainless Steel Coupling Nut, 8-Pack

  • 8 Pack 5/16-18 X 1-3/4" Long Hex Coupling Nut with Zinc Plate NCUP005C000STLZN.
Check Stock

EXELAIR 20 Piece Recoil Hose Kit

  • THUMB SWITCH BLOW GUN: Compact, easy, and precise handling. Press lever w/convenience of 1 thumb..
  • BALL FOOT AIR CHUCK: 360 degree swivel, easily fits into motorcycle wheels and other tight places..
  • M-STYLE COUPLERS + PLUGS: 1/4" NPT threads, most common standard size..
  • HEX Coupling/Nipple: Allows for interchangeable M/F connector ends with different thread sizes..
  • INCLUDES: Blow gun, hose, chuck, gauge, adapter, inflation needle, tips, couplers/plugs, tape + case..
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock