Best Heavy duty Puller Tool

DASBET 5pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • This ball joint separator tool is made if heavy duty forged alloy steel, with high strength and durability..
  • The tie rod removal tool is designed to easily remove Pitman arms, tie rods, and ball joints..
  • The ball joint separator tool is packed in a plastic carrying case for easy storage and transportation..
  • The 5pcs front end service tool kit is suitable for a wide range of domestic and imported vehicles..
  • Package Includes: 1x Pitman Arm/Tie Rod End Puller 1x Ball Joint Separator. 1x Pitman Arm Puller 1x Ball Joint/Tie Rod End Remover 1x Tie Rod/Inner Bearing Race Puller. All products are 100% brand new. If you think the item you received is used, please contact us for a replacement..
Check Stock

ABN Dent Puller Suction Cup 2in – Small Dents Remover for Pulling Automotive Car Hail and Door Ding Damage

  • GREAT FOR DENT PULLING: The ABN Car Dent Remover Kit Dent Suction Cup is great for pulling dents from metal and plastic auto bodies.
  • REUSE FOR VARIETY OF APPLICATIONS: While this heavy duty suction cup dent puller is designed to be used as a paintless dent remover tool, it is also....
  • STRONG LIFTING CAPACITY: The 2 inch (5 cm) mini suction dent lifter car dent remover tool is designed to get into tight spaces and to work with....
  • SAFE FOR YOUR VEHICLE: Constructed of heavy-duty rubber and ABS plastic, this car dent puller suction cup car dent fixer is designed to lift and pull....
  • EASY TO USE: Prior to use, clean the area and wet the car suction cup tool to improve contact.
  • Place the black suction cup to a flat section of the....
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

AMERICAN MUTT TOOLS 8 Inch End Cutting Pliers, End Cutting Nippers – Heavy Duty End Nipper Pliers and Nail Puller Pliers | Nail Nippers Tool, Screw Cutter Tool, Fret Cutters Flush, End Cutter Pliers

  • Like a Hot Knife Through Butter: The end nippers flush cut heavy duty compound leverage design helps you effortlessly cut through nails, screws, staples, frets and more. Great nail cutting pliers for carpentry..
  • Ergonomic: Give your hands the break they deserve. Our end snips ergonomic handle design helps eliminate fatigue from extended use. The end cut pliers also easily fit into most tool pouches..
  • Built To Last: The 8 inch bull nose pliers heavy duty cutting heads undergo a specialty heat treatment process which allows these nipping pliers to cut just as cleanly the 100th time as they did the 1st time..
  • Heavy Duty: Made from precision forged alloy steel, this fret puller pliers tool works just as hard as you do. Our pincer pliers use compound leverage to allow you to slice through nails with just one hand..
  • Limited Lifetime Manufacturer Warranty: This bullnose pliers tool is backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. Our brad nail puller is professionally made in China..
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...emove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating flui....
Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • [APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
  • [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
  • [DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
  • [PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.
Check Stock

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
  • Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...h-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance ....
Check Stock