Best Heavy Duty Screw Jack

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

...up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
ISO9001 certified for strength and durability.
ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Min height has an 11,200-pound (5,080 kg) capacity.
Max height has a 2,500-pound (1,134 kg) capacity.
Install base plate on a stable concrete slab under the area you w....

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion.
CONVENIENT STORAGE: Heavy-duty plastic blow-molded case provides convenient organization and easy transportation.
The 10 x 5.2 x 2.8 inch (25.4 x 13.2 x 7.1 cm) carrying case features lock latches for safe storage.

Check Stock

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

[22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
[TRUCK JACK SPECS] - Minimum Height: 8 2/3".
[WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
[RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
[STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....

Check Stock

K Tool International Hydraulic Jack 22 Ton Blue Air Truck Jack HD KTI63194

[22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs..
[TRUCK JACK SPECS] - Minimum Height: 9" (228mm).
[BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
[BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation..
[STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear..

Check Stock

osemar Boat Trailer Jack with Wheel 1500 lbs 6\ Dual Wheels Swivel

Small trailer jack wheel, , lifts and lowers your boat trailer, lifting capacity: 1500 pounds, adjustable height: 10-1/2"..
Trailer jacks using precision seamless steel pipe, the surface is galvanized, anti-corrosion and anti-oxidation..
Boat trailer jack heavy duty thicken and widen, high-load double nylon wheels, loose nut, effortless implementation and high safety..
1500 trailer jack mounting plate and interface are double-layer reinforced, with strong bearing capacity and durability..
boat trailer stand crank handle is upgraded, the installation screw cap is detachable, and the handle cover is more convenient to replace..

Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).

Check Stock

Bestauto Bottle Jack 50 T Car Jack Hydraulic Floor Jack 110000LBS with Pneumatic & Manual Hand Pump Air Jack Heavy Duty Auto Truck Repair Lift

Air/Hydraulic Bottle Jack: VEVOR 50 tons/110231 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
6-3/10" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 50 tons/110231 lbs and has a lifting range of up to 10-1/2 in/27 cm to 17 in/43 cm..
Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. With high-strength air tube, the enhanced compressed air lift with reinforced seal can ensure your security. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
Considerable Details: With two big wheels and a portable handle, the bottle jack is not trouble when it comes to movement and splicing handles also mean that the storage is easy..
Heavy-Duty Steel Structure: This pneumatic bottle jack is constructed of heavy-duty steel for maximum durability. The serrated saddle provides a spacious lifting area. The wide and thick base provides stable support and security. With our bottle, there is nothing to worry about..

Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..

Check Stock

Bottle Jack 20 Ton Air Hydraulic Bottle Jack Blue Air Car Jack Heavy Duty Repairing Lift

Air/Hydraulic Bottle Jack: VEVOR 20 tons/44092 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
6-5/8" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 20 tons/44092 lbs and has a lifting range of up to 10-1/4 in/26 cm to 20 in/51 cm..
Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
Considerable Details: A compact structure with dual fast retractable springs to ensure the product can be successfully reset after use. The height of the rod can be adjusted flexibly. Rod adjustable height: 3-1/8 in/8 cm..
Heavy-Duty Steel Structure: This pneumatic bottle jack is made of Q235 steel material, providing maximum durability and security. The highly rugged construction provides both power and security. With our bottle, there is nothing to worry about..

Check Stock