Best Heavy Duty Hydraulic Cylinder

Powerhorse Horizontal/Vertical Log Splitter - 22 Tons 212cc Engine

Heavy-duty hydraulic system protects and extends the life of hydraulic system components by preventing contaminants from entering and circulating....
10 Micron Zinga-made Powerhorse filter removes contaminants created during operation or introduced when adding or changing oil.
100 Mesh suction strainer acts as a pre-filter to prolong the life of the return line filter, valve, pump and cylinder and also prevents contaminants....
40 micron breather prevents airborne contaminants from entering the hydraulic system.
Inlet and outlet locations are on opposite sides of the tank to promote cooling of the hydraulic fluid by increasing its travel time.

Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.

Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
Diverse Application: This hydraulic bottle jack with ....

High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..

Includes thumb, hydraulic cylinder, hydraulic hoses, mounting plate, pins, and bushings..
Hydraulicpowered retraction gives full control over load size and adds crushing strength to grip..
Heavy duty steel plasma cut for tight tolerances..
1/2" Flat face couplers and hoses included..
Thick powder coat to resist rust. | Easy to assemble and weld into place..

Honda commercial GX200 series engine with cast iron cylinder sleeve, low oil shutdown and steel fuel tank.
American-made Concentric pump and Brand valve.
NorthStar hydraulic cylinder with premium Halite seals.
Auto throttle control to save fuel, reduce noise and prolong engine life.

Honda commercial GX270 series engine with cast iron cylinder sleeve, low oil shutdown and steel fuel tank.
American-made Concentric pump and Brand valve.
NorthStar hydraulic cylinder with premium Halite seals.
Auto throttle control to save fuel, reduce noise and prolong engine life.

[Wide Applicability] - Ideal for car, truck, farm and heavy equipment repair. Great for auto body, frame repair and construction work.
[Adjustable Height] - With the heat-treated extension screw, the hydraulic jack can be adjusted for lifting height. Max Lifting Height: 135 mm-358MM, Cylinder Min Height:390 mm, which will make your work easier..
[High Quality Materials] - Heavy duty & high durability metal material with up to 6 Ton weight capacity. Thick & solid construction ensure long-term service life and stability.
[Long Handle] - The long handle can ensure you low pumping effort when you are at work. It is easy to use.
easy to assemble. And leakless design makes the work more safe..
[2M Oil Tube] - The high quality oil tube is extended to 2m. Long enough to makes your operation more convenient and high performance can also be achieved..
[Portable Hard Case] - Comes with a plastic case. When not in use, it can be easily put back into the case to save space. They are easy for storage and carry..
[Package Include] - 1x hydraulic hand pump, 1x round seat, 1x rubber ball, 1x V-shaped head, 1x wedge head, 1x connector, 1x flat base, 1x pressure nozzle, 1x ring claw, 1x extension foot, 1x hydraulic cylinder, 4x connecting rods of different lengths..

Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.