Best Heavy Arms

CAP Barbell Safety Catches / Spotter Arms for FM-905Q Color Series Black

  • BUILT TOUGH – Made with 10 & 11-gauge steel & welded to a 3-sided face plate, these safety catches offer the security & grip needed when using the....
  • HEAVY-DUTY – With a maximum static weight capacity of 500 pounds and 10 & 11-gauge steel construction, these catches safely support heavy loads.....
  • ADJUSTABLE – Easily adjust safety catches to preferred height for squats or bench presses. Simply twist & pull spotter arm & insert into desired....
  • DEPENDABLE – 16-inch length of these spotter arms provides support needed when going heavy. Welded end caps prevent bar from rolling or slipping off....
Check Stock

VIVO Premium Dual Ultra Wide LCD LED 27 to 38 inch Monitor Desk Mount, Heavy Duty, Adjustable Telescoping Arms, Flush Wall Setup, Fits 2 Screens, Black, STAND-TS38C

  • Fits 27” to 38” Monitors - Dual monitor mount fitting two ultrawide and regular screens up to 38” in size and 22 lbs in weight (each) with VESA 75x75mm or 100x100mm mounting holes. Secures to your desk with a heavy-duty C-clamp or optional grommet mount for solid stability. Maximum recommended desktop thickness is 3.25”. --Patent Pending--.
  • Premium Telescoping Arms for Flush Setup - Heavy duty arms adjust in length to fit larger, ultra-wide monitors. Unique telescoping design expands arms straight outwards so that nothing extends past the back edge of your desk, creating a flush-to-wall setup. The arms slide into each other for added strength and stability..
  • Articulation & Height Adjustment - Adjustable mount offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation..
  • Easy Installation - Mounting your monitors is a simple process with detachable VESA brackets. The stand secures to your desk (up to 3.25” thick) via heavy-duty C-clamp or optional grommet mount for excellent support. Instructions and hard....
Check Stock

180°|Helping Hands| Workbench| Helping Hands Soldering With Four 360° Lockable Stainless Steel Arms| 1KG Weighted Stainless Steel Base With Non-Slip Rubber Feet| Tool For Soldering & Electronic Repair

  • 【How Do You Choose the Best Soldering for Helping Hands?】1)Foundation- The best soldering helping hand station should have a heavy and well-protected base to ensure stability and durability 2)Arms-The best helping hand has at least two or more flexible arms 3)Alligator Clips-These clips have grippy metal teeth and silicone or rubber covers. Keep in mind that alligator clips have limited openings. A soldering station with interchangeable clips is the best option for greater versatility..
  • 【Amazing Helping “Third Hand”】The 180° Third Hand Helping Arms Tool is the perfect addition to any jeweler, electrician, or hobbyist toolbox. These helping hand features make it ideal for soldering, repairing, jewelry, and other projects that require attention to detail..
  • 【Weighted Stainless Steel Base & Non-Slip Rubber Feet】Unique & Heavy Stainless Steel base for greater stability with rubber legs that prevent movement.
  • 【Four 360° Lockable Stainless Steel Arms】This tools comes with four flexible gooseneck arms made of industrial grade rubber(4 large tentacles) and four durable stainless steel alligator clamps. These clamps have a magnetic repositioning throughout the base.
  • 【WARRANTY and SERVICE】Provides you with 24-hour email contact service & 3....
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • Helping Hands Soldering: Circuit Board Holder has 4 pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can support any shape of the board. Completely free your hands and let you focus on the soldering detail work once start using our excellent third-hand soldering tools..
  • Magnetic Helping Hand Tool: 4 flexible metal gooseneck arms with strong magnetic base, which have a powerful attraction to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding ....
Check Stock

Helping Hands Soldering, NAKOOS Third Hand Soldering Tool PCB Holder Station with 4 Flexible Metal Arms Solder Iron Stand Heavy Duty Steel Base for Jewelry Crafts Repair Hobby

  • 【Upgraded Gooseneck Arms】NAKOOS helping hands is built strong. This soldering helper comes with 4 upgraded gooseneck arms. They are made of stainless steel. Corrosion resistant and stronger than cheap plastic arms. And The arms are heavy duty and move perfectly to where you need them..
  • 【Weighted Metal Base】This third hand soldering tool has a heavy duty base. Not easy to move when you are doing soldering work. The bottom rubber pads make the base more stable and anti-slip. It isn't going to slide around on your workbench..
  • 【Adjustable Alligator Clips】This helping hands soldering station has been equipped with stainless steel alligator clips on it’s arms. The clips are good and very adjustable. Each clip has 360 degree rotating adjustment extra rubber cover for PCB. Locks in place with knurled thumb nuts..
  • 【Detachable Soldering Iron Stand】There is an additional metal soldering iron stand contained in the pack, solving the issue where to place the soldering pen after using. The stand is detachable and easy to install. Suitable for desoldering work..
  • 【Widely Use & Service】 This solder station is easy and simple to set up, could be widely used in soldering, desoldering, electronic repair, crafting, modeling. NAKOOS is strict w....
Check Stock

CAP Barbell Safety Catches / Spotter Arms for FM-905Q Color Series Red

  • SPECS – Sold as a pair. Please note, these spotter arms are ONLY FOR USE WITH CAP Barbell’s FM-905Q series and FM-CS7000F. Dimensions for each....
  • BUILT TOUGH – Made with 10 & 11-gauge steel & welded to a 3-sided face plate, these safety catches offer the security & grip needed when using the....
  • HEAVY-DUTY – With a maximum static weight capacity of 500 pounds and 10 & 11-gauge steel construction, these catches safely support heavy loads.....
  • ADJUSTABLE – Easily adjust safety catches to preferred height for squats or bench presses. Simply twist & pull spotter arm & insert into desired....
  • DEPENDABLE – 16-inch length of these spotter arms provides support needed when going heavy on your CAP FM-CS7000F or FM-905Q Color Series Power Rack....
Check Stock

Heavy-duty Steel Slatwall Keyboard Arms Pair Telescoping Arms From 12 to 18 and Downward Angle is Adjustable to 15° 30° and 45° - Manufacturer Direct - Quantity 1 1 Black

  • FUNCTION - These heavy-duty Slatwall keyboard arms (Pair) are perfect to be used in a retail environment to display a keyboard or at home. They are....
  • ADJUSTABLE - The arms can be adjusted to slant down from flat to 15°, 30°, and 45° angles, and the arms are able to telescope out from 12" to as....
  • PROTECTION - The arms are padded on the top and front for the protection of the instrument. Non-marring foam padding preserves your instrument's....
  • DURABLE - The black powder-coated finish on the arms and the foam will withstand regular use and can be easily cleaned off with a damp cloth. The arms....
Check Stock

Dynarex Locking Raised Toilet seat with arms, Portable

  • DURABLE SOLUTION: The Dynarex Raised Toilet Seat with Arms is constructed of heavy-duty molded plastic for durable, safe support. The seat provides an additional 5 inches of height to prevent unnecessary strain and includes removable, padded arms..
  • SAFE LOCKING DESIGN: No tools are required for assembly and this unit affixes to your existing toilet. The Raised Toilet Seat with Arms features a locking device, with larger, heavy-duty worm screws and locking plate to ensure user safety..
  • USER COMFORT: The Dynarex Raised Toilet Seat is designed for use by those having difficulty moving from a standing to a sitting position and require additional height for safe, comfortable use of the toilet. The seat has a weight capacity of 300 pounds..
  • LIGHTWEIGHT AND PORTABLE: The lightweight unit weighs about 5 pounds making it convenient for home and travel use allowing the user increased independence outside the home. It is easy to clean with non-abrasive cleaning products and standard disinfectants..
  • HIGH QUALITY: This elevated toilet seat will fit round, standard toilets. The width of entire seat area inside the handles is about 18 inches. Dynarex provides Best in Class alternative to other leading brands..
Check Stock

SainSmart Magnetic Helping Hands Soldering Station with Larger Base LED Magnifying Lamp 4 PCB Circuit Board Holder & 4 Flexible Magnetic Helping hands

  • Free Your Hands: With four 7.5 in/ 14.0 in adjustable metal gooseneck arms and four PCB Pillars to use as a Circuit Board Holder. All have strong....
  • Larger Working Area: This helping hand comes with a 11.1x 7.1 in base which is larger than most of the products on the market. You can freely place....
  • User Friendly Design: Each clip comes with rubber sleeves which can effectively protect the surface of electrical board or jewelry from damage. This....
  • Heavy Duty Base: Over 2.4 pounds with a powder coated steel base that is sturdy enough to ensure your workstation doesn’t tip over. The bottom has 4....
  • What You Get: 2x 7.5 in metal gooseneck arms, 2x 14.0 in metal gooseneck arms, 4x PCB Circuit Board Holder, 1x LED Magnifying Lamp, 1x Heavy Metal....
Check Stock