Best Harmonic Drive

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

Harmonic Balancer Socket Tool 77080 19 mm Crank Bolt Socket for Honda 3 Times Momentum Power of Standard Impact Sockets

  • GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
  • can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
  • PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
  • EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....
Check Stock

JOYO JF-02 Ultimate Drive Overdrive Guitar Effect Pedal

  • Ultimate Drive Overdrive Guitar Effect Pedal.
  • Hybrid OCD distortion of solid state or vacuum tube tone.
  • Effects of electron tube amplifier and complex harmonic spacious sound.
  • Intermediate between distortion and overdrive, different from the normal diode clipping circuit..
  • Hybrid OCD distortion of solid state or vacuum tube tone, create the tone of a tube amplifier at volume..
  • Soothing and sweet tone & more active redundancy..
  • Effects of electron tube amplifier and complex harmonic spacious sound..
  • Also added High and Low switch to tailor overdrive frequencies to your liking..
  • Powered by: 1 * 6F22 9V battery / DC 9V adapter (neither included).
  • Effect pedal size: Approx. 12 * 6.7 * 5.6cm / 4.7 * 2.6 * 2.2in.
  • Package size: 12.8 * 7.5 * 6cm / 5.0 * 3.0 * 2.4in.
Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

  • FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
  • Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
  • WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
  • EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
  • INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
  • Easily take this harmonic balancer puller set from job to job.
  • PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.
Check Stock

Mofeez 77080 19mm Harmonic Balancer Socket for Honda

  • HIGH QUALITY-----Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion..
  • USE WITH-----Mofeez harmonic balancer socket use with 1/2" drive..
  • USE FOR-----Our heavy duty socket can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.Also good for....
  • FEATURES-----Thicker wall,reducing flex and vibration to deliver maximum torque..
  • WARRANTY-----18 MONTHS Limited Warranty..
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

Dorman 594-006 Harmonic Balancer , Black

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

  • [QUICK & SAFE] GM harmonic balancer puller kit is intended to quickly and safely remove harmonic balancers without tapped holes. This tool features a "clip-in" design allowing removal without bolting the puller to the balancer. The harmonic balancer without threaded holes can also be easily removed..
  • [APPLIACABLE VEHICLE] The harmonic balancer puller tool is compatible with GM models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 L. Compatible with Chrysler, Jeep, Dodge models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
  • [INAPPLICABLE VEHICLES] This tool is not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. (If you have any issue, please feel free to contact us by email).
  • [EASY TO USE] Lubricate and tighten the pressure screw, after inserting the jaws into the spokes, turn them carefully clockwise to engage the harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
  • [HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, w....
Check Stock

Lepy LP-2024A-HA LP-2024A+ Hi-Fi Audio Stereo Power Amplifier Car Amplifier 3A Power Supply

  • Power amplifier, lepy power amplifier with high fidelity and high efficiency, high power amplifier, subwoofer compensation for public advertising,....
  • If you have a radio, MP3 or other stereo system attached to your car or motorbike, get great sound on the move with this 2.1 Channel Hi-Fi amplifier....
  • For MP3, iPod, CD player input jack. Total harmonic distortion less than 0.4%, PROVIDING you perfect Audio Quality..
  • Capable to drive the audio signals from MP3, MP4, CD, Radio, DVD. Mini size and easy to install ,Fits perfectly for a car, motorcycle or boat.
  • Capable to drive the audio signals from MP3, MP4, CD, Radio, DVD. Mini size and easy to install ,Fits perfectly for a car, motorcycle or boat..
Check Stock