Best Hard Drive Expansion Bay Bracket

Alloy Steel Hard Drive Cage,Steel Plate Cage Hard Drive Tray Rack with Fan Space,Adapter Rack Bracket SATA 5.25\ to 5X 3.5 Rack PC Supplies for Computer SAS

  • It fits for PC Case which CD-ROM Slot Inwall is flat, or Bracket Installation Type CD-ROM Slot, Some PC case special design may not support this Hard Drive Rack, then you can only DIY your PC Case or use it External, please note before buying.
  • Heat Dissipation:With 1x 12cm cooling fan Install slot space.Can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Perfectly fitting with the optical drive bay, accurately locating the site of case, hard drive and screw hole, easily expanding storage capacity..
  • Holding 5x 3.5 With Cooling Fan Install Lock space. Hard Drive Cage Drawer Rack Bracket.
  • Package included: (Fan and Hard Drive are not included) 1 set x HDD Hard Drive Cage Rack..
Check Stock

Mediasonic SSD Mounting Bracket for 2.5-inch to 3.5-inch Hard Disk Drive HDB-G1

  • Converts an available 3.5-inch hard drive bay to accomodate ONE 2.5-inch HDD or SSD.
  • This bracket is also designed as a 2.5-inch HDD / SSD bracket adapter for Mediasonic external hard drive enclosure..
  • Compatible Model: HF2 Series, HFR2 Series, HF7 Series, HFR7 Series, H82 Series, H8R2 Series, HUR3 Series.
Check Stock

SSD Mounting Bracket, SNANSHI 2.5 to 3.5 Hard Drive Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD (Pack of 2)

  • 2.5 to 3.5 Adapter: Hard drive mounting kit supports installing a 2. 5” hard Drive into a 3. 5” internal Hard Drive slot. The mounting fit all 2. 5” SSDs and HDDs.
  • Quality Selection: SSD adapter 2.5 to 3.5 made of durable metal alloy, can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Easy installation: ssd bracket 2.5 to 3.5 a complete set of tools needed for installation ( screws) is packaged. You can easily utilize unused hard drives to extend capacity of your computer by following simple steps.
  • SSD Bracket:Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay.
  • Package Included: 2Pack 3.5 to 2.5 adapter, 16 x Mounting Screws.
Check Stock

Supermicro Rack Mount Server Chassis CSE-505-203B,Black

  • 9 8"-Depth Mini 1U chassis support for maximum motherboard size - 6 75" x 6 75" Mini-ITX.
  • Drive Bays 1x 3 5" Internal Drive Bay (w/ 1x Half-height Half-length PCI Slot) or 2x 3 5" Internal Drive Bay or 2x 2 5" Internal Drive Bay (w/ 1x Full-height Half-length PCI Slot) or 4x 2 5" Internal Drive Bay.
  • Expansion Slots 1x PCI Slot (Full-height Half-length).
  • Power Supply 200W 80 PLUS Gold Certified Low Noise AC-DC Power Supply w/ PFC.
Check Stock

Nimitz 2nd HDD SSD Hard Drive Caddy for Hp Elitebook 8560p 8570p with Faceplate/Bezel

  • Add a 2nd drive to your laptop by replacing your optical drive.
  • Comes with matched Faceplate/Bezel and mounting bracket,fits perfectly.
  • Works in optical drive bay of HP Elitebook 8560p 8570p.
  • Accepts 2.5″, 12.5mm-high SATA hard drives or less,Also compatible with 2.5″ SSD.
  • The hard drive attaches to the caddy from the side using long screws( 3rd picture).
Check Stock

ORICO 5Bay Hard Drive Enclosure Type-C to SATA 3.5inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup, NAS Expansion Up to 80TB(5x16) - DS500C3

  • ...and improving your working efficiency..
  • Up to 80TB Large Capacity -- The usb c hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
  • Super-Speed Transmission -- Multi bay external hdd hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect type-c high-speed and adopted with high performance master control chip, the hard drive external bay with the speed transmission reaches up to 5Gbps, much faster than the traditional USB3.0..
  • Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay hd usbc enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..
  • Multi-protection -- Anti-over voltage, over-current, overheat, short-circuit, leakage and other multiple protection designs to ensure the security of data transmission of the external hard enclosure 3.5. Compati....
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

Zerone 5.25 to 3.5 / 2.5 Bay Mounting Bracket Kit 5.25 Bay SSD to Dual 2.5 HDD/SSD & One 3.5 HDD/Device Front Bay with Mounting Screws

  • [Good Function] This plastic, floppy-drive adapter bracket lets you install 2.5inch / 3.5inch floppy drives into a 5.25 inch bay..
  • [Value Upgrade Of PC Drive Bay] Included mounting screws. Comes with a baffle. Multifunctional combination to improve the use value of PC drive bay..
  • [Practical] Fits 2 x 2.5 inch HDD / SSD + 1 x 3.5inch HDD..
  • [High Quality] Made from engineering plastics, strong and durable, which can support long time use..
  • [Wide Compatibility] This floppy-drive bracket is compatible with standard 5.25inch bay of PC..
Check Stock

ORICO 5 Bay Hard Drive Enclosure USB 3.0 to SATA 3.5 inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup NAS Expansion Up to 80TB 5x16 - DS500U3

  • ... hard drives in 3 seconds to saving your time and improving your working efficiency..
  • Up to 80TB Large Capacity -- The usb hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
  • Super-Speed Transmission -- Multi bay usb 3.0 hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect USB 3.0 high-speed, the 5 bay 3.5 sata hdd enclosure with the speed transmission reaches up to 5Gbps, about 20% faster than the traditional USB2.0..
  • Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay 3.5inch enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..
  • Multi-protection -- Anti-over voltage, over-current, overheat, short-circuit, leakage and other multiple protection designs to ensure the security of data transmission of the usb3 external drive enclosure. Compatible with Supports Windows XP / Vista / 7/8, Mac OS X 10.2 and higher & Linux..
Check Stock