Best Handheld Oscilloscope 2

Goupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

  • ⭐【2 in 1 Oscilloscope & Transistor Tester】--- This portable digital oscilloscope combines an electronic component tester, PWM signal generator, and other functions into one."Oscilloscope" mode to test the signal waveform of the circuit while"Mos Test" mode can test various types of transistors and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, resistance, inductance components and etc. More cost-effective to use, more test functions to choose from..
  • ⭐【High-precision & Real-time Display】--- The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth. Up to ±400V voltage signal can be measured. Self-contained 80Khz/5.0V PWM wave test signal source with adjustable duty cycle. With a Single, Normal, Automatic trigger, it can be used for both periodic and aperiodic digital signals. Other modes include circuit continuity test, 0-16V input voltage measure, PWM output, 0-24V Zener diode measure and etc..
  • ⭐【2.4 Inch TFT Screen & 1500mah Rechargeable Battery】--- The transistor tester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscil....
Check Stock

allsun Handheld Digital Oscilloscope Multimeter DIY Portable Automotive Diagnostic Lab Scope 3 in 1 Color LCD Display DMM 50MHz Single Channel

  • Digital Oscilloscope is portable tool for waveform measurement. In contrast with analog oscilloscope, desktop digital oscilloscope or digital multimeter, it is one of the best test tool for use in teaching or field.
  • The handheld oscilloscope the bandwidth is 50 MHz, the sampling rate is 200 MSa/s, and it owns 320*240 mm high-resolution color-screen, auto function works great and gives the best results most of the time, saving time and adjustments.
  • The Automotive Oscilloscope combines scope function, multimeter function and signal generator function,it is a beautiful looking unit works pretty well and has a nice feel from the rubber case.
  • The oscilloscope can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work.
  • The portable oscilloscope fetures 6000-count high-precision multimeter chip, NPX intelligence collection chipset. 4100 mAh Sony lithium-battery long working hours.
Check Stock

Handheld Digital Oscilloscope,Seesii 120MHz Bandwidth 500MSa/S Sampling Rate Portable Storage Oscilloscope, 2.4\ Ultra-Clear Backlight Display, 3 Scan Modes,Support Storage of 2500 Waveforms

  • ✅【2021 UPGRADED OSCILLOSCOPE】: Seesii handheld digital oscilloscope with 2.4inch TFT high definition screen, made of high quality materiels, lightweight and portable,durable enough for long term use, with the protective silicone covers on both sides of the instrument, which can protective the product and prolong the service time of it.Suitable for home appliance inspection, automotive diagnostics, research and education, product development, utility testing and many other applications..
  • ✅【HIGH QUALITY & MULTIFUNCTIONAL】:This is a fully functional, practical and cost-effective professional portable oscilloscope. The waveform bandwidth up to 120MHz with an equivalent sampling rate of 500MSps. Support 1kHz、10kHz、100kHz、1MHzfour-position square wave signal output.Store up to 2500 waveforms, support thumbnail view, waveform delete and other functions..
  • ✅【3 TRIGGER MODES & WAVEFORM PARAMETER SETTABLE】:The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger.Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement, can meet your different measurement ....
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

LCD Handheld Digital Oscilloscope Kit - 138 Pro 2.4"TFT Mini Automotive Oscilloscope 200Khz Digital Oscilloscopes Portable 2.5Ms/s Sampling Rate, 80khz Pwm, Trigger Function Auto/Nomal/Single

  • Faster Sampling Speed: Digital oscilloscope has a real-time sampling rate of 2.5MS/s, a bandwidth of 200KHz, 80KHz Pwm，and a complete trigger function (single, normal, automatic). Equipped with efficient one-key AUTO, the measured waveform can be displayed without tedious adjustment. It can be used freely for both periodic analog signals and aperiodic digital signals, and can measure voltages up to ±400V.
  • More Powerful Detection Range: A cost-effective handheld oscilloscope for people in the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs.
  • Clearer Lcd Display: Portable oscilloscope is equipped with a 2.4-inch high-definition LCD screen with a resolution of 320*240, which is small in size and has strong anti-overload capability.
  • Longer Battery Life: Automotive oscilloscope has a built-in 1000mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. At the same time, it is equipped with a type-c charging cable, which can also be used while charging, which is very convenient.
Check Stock

UNI-T UTG962 Function Generator, UTD2152CEX Oscilloscope, UTP1306 Switching DC Power Supply

  • UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one..
  • Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer..
  • Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance..
  • True RMS Multimeter for Voltage, Current, Resistance, Capacitance, Duty Cycle & Diode test. Double Insulated and Protected against Overcharges..
  • Simplify operation, convenient to use. Portable, light weight. Automatic Sleep Mode, Automatic Power Off, Automatic Range, Automatic Polarity Indication, Automatic Over-range Indication..
Check Stock

OWON HDS272 Oscilloscope 2 in 1 Universal Test Instrument Professional LCD Display Screen Mini Handheld Digital PC Oscilloscope,20000 Counts Digital Multimeter with Lithium Battery 70 MHz + 2CH

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High....
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast....
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be....
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto....
  • ✨[USB Type-C Interface]: Type-C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby....
Check Stock

Mini Handheld Digital Oscilloscope, Support Persistence, PWM, 14 Type Measurement, 40MSa/s Sampling Rate, 18MHz Bandwidth, Signal Generator Frequency 500Khz, 2.4” LCD Display with 10X, 100X Probe

  • Faster Sampling Speed: Compared to the previous 138pro mini oscilloscope, this upgraded 154pro mini oscilloscope has a real-time sampling rate of 40MSa/s, a bandwidth of 18MHz, 500Khz signal generator frequency. Improve your work efficiency..
  • 2 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 2 trigger modes, auto/normal. Support waveform parameter setting,such as time base, amplitude, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
  • There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base..
  • Built-in High Voltage Protection: The handheld oscilloscope built-in high voltage protection module can withstand up to ±400V AC/DC voltage signal. And built-in 1000m-Ah high-quality battery, can be used continuously for about 6 hours after full charge..
  • Wide Applications: Ideal for the maintenance industry and the R&D education industry. It's very valuable for find ....
Check Stock