Best Grooving Cutting Machine

Compact Wood Router, Trim Routers Hand Edge with 1/4 Inch Collets, 110V 800W 30000R/MIN Handheld Routers for Woodworking, Hand Wood Carving Trimming

【Durable】LOONPON wood router is made with high quality Aluminum + Plastic which is durable to use and have long service life..
【Easy Operation】The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
【Power Design】Power is 800 watts, the voltage is 110V, the chuck diameter is 6.35mm, and the power is 30,000 rpm. The 1/4" motor can provide enough power for wiring and fine-tuning applications. Effective heat dissipation and protection of the machine. Anti-vibration, practical, simple operation, durable..
【Stable】The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
【Widely Used】Widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving..

Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..

Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

Urtzcoye Cordless Angle Grinder Tool with Cutting Machine Table Saw adaptor 21V

4AH Long Lasting Battery --- Equipped with super large capacity replaceable lithium battery which can provide supper long working time and also with ultra fast charging, let your get rid of cord messing and out of power dilemma. Great tool for use at anytime anywhere..
Adjustable Speed --- This cordless angle grinder tool with 2 degree speed for choose, push the power button to control easy operation to meet different working needs.
Easy Replace Disc & Wide Application --- Spindle lock switch help quick replace disc grinding disc, improve working efficiency. This machine can use for milling, grinding, polishing, cutting, stone grooving and cooperate with saw blades for logging working, etc..
Angle Grinder Holder sliding cutting, stable operation, large cutting range, the maximum clamping angle of the clamp can reach 45°, and the maximum clamping length is 15cm..

Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

Sandvik Coromant CoroCut 1-Edge Carbide Grooving Insert, 90 Degree Offset, GS Geometry, GC1115 Grade, Multi-Layer Coating, 1 Cutting Edge, RG123H1-0200-0002-GS, Right Hand Cutting, 0.079\ Cutting Width, 0.0079\ Corner Radius, H Insert Seat Size (P...

Used with the Sandvik Coromant CoroCut 1-2 for external deep grooving in stainless steel.
GC1115 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) and chromium oxide (Cr2O3) over carbide that provides wear resistance without limiting shock resistance in average-to-good machining conditions.
GS chipbreaker has sharp cutting edge for deep grooving at low feed rates.
For use with rail-shape clamp toolholders for security.
One cutting edge and a right-hand 90-degree offset angle for difficult-to-access grooving areas.

Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/36 Lathe Grooving Metal Cutting Tools, 10pcs

Size, SP400, Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm.
General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.

Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.

Check Stock