Best Grip Range 3 313 3 437

Interstate Pneumatics H8-KIT Heavy-Duty Bench Crimper (H8) with Ferrules (50pk) 0.625' ID x 1' & 0.656' ID x 1'

Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands.
Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67".
1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation.
F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.

...ining Modes (beep, 0-9 vibration, 0-30 shock mode). Dog shock collar can effectively and scientifically assist you in training your dog. The remote's flashlight (can be turned on when off) help you find your dog quickly in dark environments..
【Up to 3/4 Mile Control Range】Compared with other remote control ranges of only 1000-2000FT, KAIYIKAPET upgraded dog trainer can reach 3937FT/1312Yard, and the obstacle range is 1312FT/437Yard. Super two-way transmission signal, don't worry about losing the signal..
【IPX7 Waterproof & Dustproof】Our dog training collar waterproof training collar allows dogs to play freely. Wear it without worrying about wading, not afraid of mud to meet the needs of multi-scene training, giving you the maximum flexibility in outdoor activities without damaging the receiver..
【Fits Most Sizes of Dogs】E Collar Adjustable Range: 4.0-7.1 inches in diameter, suitable for dogs with a neck circumference of 11.8-21.6 inches. Stronger collar, suitable for dogs of all sizes (10-130lbs), meeting the different needs of large, medium and small dogs without burdening them..

1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..

【Spray Gun Filter】High quality stainless steel filter, size: 10cm/3.94 “, corrosion resistant, compression resistant, uniform mesh, no broken hole, no twisted wire, universal..
【Easy to Install】First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the protective seat and rotate to complete the installation, time saving and labor saving for your project..
【Airless Sprayer Tips】These paint sprayer tips are compatible with most airless paint sprayers, and 211, 313, 415, 517, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.017 inches, 0.021 inches, and the spray range is 4 to 14 inches..
【Widely Application】Suitable for most mainstream airless sprayers guns, suitable for painting, furniture, fences, home decor, industrial fine painting and decoration, etc..
【Package Includes】5 Pieces airless sprayer tips and tip seal in 5 sizes(211, 313, 415, 517, 623), 5 pieces spray gun filter replace for airless spray paint machine. Sufficient quantity and different sizes to meet your different needs..

SPST, 16 Amp @ 125-250 VAC, 3/4 H.P. @ 125-250 VAC, 10 Amp @ 14 V (T), 3 Amp @ 125V(L).

1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..

1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..

1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..

1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..