Best Green 3d Printer Power Adaptors

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

ELEGOO Mars 4 DLP 3D Printer and ELEGOO Standard Resin Grey 1000g

  • LEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³.
  • ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g.
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Yellow) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Matte Yellow Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Check Stock

MakerBot Replicator + 3D Printer with swappable Smart Extruder+ Black MP07825EU

  • Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power....
  • Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements –....
  • Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill,....
  • The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components.
  • Winner of PC Mag Editor’s Choice Award, iF Design Award, Techcrunch best Classroom 3D printer.
Check Stock

ELEGOO Saturn 2 MSLA 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

  • 【9.25'' Larger LCD Screen】 ANYCUBIC Photon mono X 6k 3d printer is equipped with a 9.25inch monochrome screen, which is 138% larger than a normal 6-inch screen. The monochromatic screen lasts 4X longer than the RGB LCD screen, and a special replaceable scratch-resistant film is added above the screen to save your maintenance costs..
  • 【Achieve Larger Print Volume】 The ANYCUBIC Photon Mono X 6K Resin 3d printer can print up to 9.6 x 7.8 x 4.8 inches (HWD). The large volume can print large-size models or multiple models at one time, effectively improving your work efficiency..
  • 【High Precision & High Resolution】 The Photon Mono X 6K LCD screen has a high resolution of 5,760 x 3,600 px and a contrast ratio of over 350, which can fully express the details of the character model's hair, fingers and so on. 40 bright LED lights arranged in a matrix provide intense and uniform exposure in each layer of print, improving print quality and accuracy..
  • 【Ultra-Fast Printing】 The max printing speed of ANYCUBIC Photon Mono X 6K 3d printer is 3.15 in/h. With a 6% light transmittance screen, the fastest printi....
Check Stock

ANYCUBIC Photon Mono X 3D Printer UV LCD Resin Printer with 8.9 4K Monochrome Screen WiFi Control and Fast Printing Printing Size 192mmx120mmx245mm / 7.55inx4.72inx9.84in

  • 3X Fast Printing: 4K monochrome screen Photon Mono X 3D printer single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h,....
  • Larger Print Size: 8.9“ ANYCUBIC Photon Mono X large 3D printer has an amazing print volume of 192 * 120 * 250mm/ 7.55"x4.72"x9.84", about 1.48....
  • Power Adjustment Function：Compared with other similar 3D printers, Photon Mono X can achieve 30%-100% exposure power adjustment function, compatible....
  • High Precision & 5% High Transmittance: ANYCUBIC Photon Mono X is a brand new UV light curing 3D printer, using quartz lamp beads, newly upgraded....
  • APP Remote Control & High Stability: Use this Mono X UV light-curing LCD 3D printer to realize the same space WIFI remote printing management, monitor....
Check Stock

BOSOKU PLA 3D Printer Filament Matte Black/Blue/Green/Grey PLA Filament 1.75mm Dimensional Accuracy +/-0.02mm, 4 Assorted Colors, 4 Spools

  • ✔️【PREMIUM MATERIALS】: 3D printer filament made of 100% new pure Polylactic Acid material, or PLA, is a bio-plastic printing material derived from natural materials, which boasts complete biodegradation and lower melting temperature, eco-friendly and safe, with no odor during the printing.
  • ✔️【4 ASSORTED COLORS】: PLA plus filament 1.75 set includes 4 Assorted Colors(4 Spools), Matte Black PLA/ matte Blue PLA/ matte Green PLA /matte Grey PLA, that offer multiple choices for your artistic creation, special colors suitable for printing lampshades, vases, and other design parts.
  • ✔️【3D PRINTING TEMPERATURES】: Recommended Printing Temperature of your PLA 3D printer filament: 374 °F to 410°F (190℃~210℃), high precision diameter 1.75mm PLA filament roll with tolerance: +/-0.02mm, that brings maximum smooth performance, no breaks, no bubbles, no clogging during even the most delicate of 3D printer work.
  • ✔️【HIGH COMPATIBILITY】: Your 3D printer filament PLA is easy to press and works with the most well-known 3D Printers with PLA filament 1.75mm in the market place for 3D art craft making.
  • ✔️【4 COLORS PACK】- 4 Spools，250g Matte PLA filament in one Package, Within 24 Hours Reply, 100% Satisfaction Guarantee, If you're no....
Check Stock

24 Colors 1.75mm ABS 3D Pen Printer Filament Refill, Each Color 3.5m, Total 84m ABS Material, Support for MYNT3D / SCRIB3D 3D Printing Pen, Not Fit for 3Doodler Pen, Pack with 2 Finger Caps by MIKA3D

  • 24 Most Popular Solid Colors List:White, Black, Light Grey, Dark Grey, Brown, Amy Green, Red, Orange, Light Orange, Light Yellow, Pink, Light Purple, Ivory, Cyan, Light Blue, Purple, Sapphire Blue, Dark Blue, Dark Purple, Rose Red, Green, Lime Green, Yellow, Dark Red.
  • Great Colors Sample Pack: 24 Beautiful Colors will Satisfy You Much Better and More, These Various Colors is Great Choice To Print Many Different Colors as You Like, Perfectly For ABS Sample Color Testing, Great Suitable for 3D Pen Drawing Arts, Crafts, DIY, It's Great Gift for 3D Create and 3D Doodling Fun.
  • High Quality: All of our ABS Filament Made from 100% New Raw Material, The Filament Diameter is More Consistent, Easy to Print, ABS is Much Stronger than PLA Filament, Widely Support for 3D Printer and 3D Pen, This ABS Refill Assortment with 94.5m Material, Total 310 Feet Pack Together.
  • Strong Compatibility: Widely Support for All 3D Pen and 3D Printer which Use 1.75mm ABS Filament, For Example: Support For MYNT3D 3D Drawing Pen, Support For SCRIB3D 3D Printing Pen, While Not Fit for 3Doodler Pen.
  • Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly and Easily, It's a Great Start Kit.
Check Stock