Best Graphics Card For Mining

Mining rig B85 8GPU Full Mining Machine, Used to Build The Mining System of Bitcoin Mining Machine and GPU Mining Machine, Including Motherboard, CPU, SSD, RAM.PSU (Motherboard)

  • ❤ Professional and powerful, the latest mining motherboard. Provides the highest signal quality..
  • ❤8 graphics card slot motherboard, 65mm large graphics card spacing, no need to switch more stable..
  • ❤Support four or five generations of CPU, DDR3 notebook memory slot, support 1660, 2070, 3090, rx580 and other series of graphics cards..
  • ❤ Please note: B85-miner motherboard includes 1820/1840CPU, 128GB SSD, 4GB RAM,.
  • ❤ B85 chip, all solid capacitors, professional mining motherboard, 100 Gigabit network card..
  • ❤ When you encounter problems in use, please contact us, we provide professional technical support..
Check Stock

Miertou VER010S-Plus High Power PCI-E Riser 16x to 1x for Bitcoin ETH Coin Mining,Powered Riser Adapter Card, 4 Solid Capacitors,GPU Crypto Currency Mining Cable with USB Power Cable,with LED

  • Miertou VER010S high-performance PCI-E express riser can extend the motherboard PCIEX1 slot to PCIEX16 slot. Will provide a safe and reliable connection with more PCIEX16 graphics cards. It will be mainly used for Ethereum mining rigs or GPU mining rigs..
  • The graphics card power supply adopts 8X solid capacitors to make the graphics card power supply more stable and safer. The extension cable with 6-pin port enhances the power supply and completely solves the problem of insufficient power supply capacity and cable burning..
  • The slot fixing bracket is designed to remove and set up the graphics card. The card will not fall off from the slot. It can be converted into a SATA port and a SATA to 6pin line, so that the power supply of the graphics card is independent of the motherboard..
  • 60cm USB3.0 cable, very soft, easy to place and route. Cables with built-in shielding nets are more stable. PCI-E1x to 16x power riser adapter card with multi-layer shielded cable will not weaken the signal within 3 meters..
  • After-sales service: If you have any questions, please feel free to contact us! , we will reply to you within 24h!.
Check Stock

6 Pack PCI-E Riser GPU Risers Card 10 Capacitors,16x to 1x Pcie Express Powered Adapter Card for Bitcoin Litecoin ETH Coin Mining with RGB Colorful LED Light & 60cm USB 3.0 Extension Cable

  • ...rnate Lights 】 5 kinds of colorful LED Christmas atmosphere RGB lights that with switch control, alternate LED lights display working state, you can turn off the light according to your preference..
  • ✅ 【Upgraded 10 Solid Capacitors】 This high quality pcie to gpu adapter is equipped 10 capacitors make sure the graphics card power supply more stable and safer, protect your GPU and investment. It is the latest and most advanced solution for setting up GPU mining equipment on the market..
  • ✅ 【Stable Input Interfaces】 Our gpu risers have 3 groups of power input Interfaces ( 6 PIN+4PIN Molex +SATA15 Pin) to reduce the burden on the connection between the motherboard and graphics cards. The Gold-plated contact ensures perfect connectivity and extend service life and provide faster data transmission speed..
  • ✅【WIDELY APPLICABLE】 Our pcie to gpu adapter with a fixed buckle that make sure the graphics card will not fall off from the slot. It is compatible with 1x, 4x, 8x, 16x PCI-E slots, suitable for all Window, LINUX and MAC systems. Plug and play, no driver needed to install. —–Bonus: 6 * Pci Riser, 6 * PCI-E 1X Adapter Card, 6*24 in USB 3.0 cables ( 90 days warranty).
Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

  • B85 miner is a standalone mining system that supports AMD/NVDIA GPUs . Including: mining machine motherboard, Intel CPU 1840/1820 (with CPU cooler), SSD (256GB), RAM (8G), PSU (1800w), 4 fans (silent), single metal frame, only need to prepare graphics card and monitor , mouse, keyboard run.
  • B85 rack-mounted mining machine, professional silent design, accelerated air convection, excellent heat dissipation design. Noise: 26.65 (dB-A) or lower, [1800w silent power supply]: The power input voltage is AV 110-230V, and the power conversion efficiency is as high as 92%, allowing you to enjoy the fun of electricity while mining..
  • The B85 rack-mounted miner is made of steel and iron, and the length of the graphics card is not limited. If you have purchased multiple miners of the same model, the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
  • The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
  • B85 miner 128GB SSD pre-installed with Windo....
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • ...equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame also can be used for RTX 3080/3090, but we recommend that you install 4-6 graphics cards, because after exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports a single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

  • ...ernal power supply can directly use the male to male cables we give away. For detailed wiring, please refer to the picture or contact us..
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency.(Graphics cards longer than 320mm cannot be used.) Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
  • Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame can be used for rtx 3080/3090, but we recommend that you install 4-6 graphics cards. After exceeding, the motherboard will automatically limit the computing power of the graphics card. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it..
Check Stock

Mining Motherboard BTC-S37 Mining Machine Motherboard CPU Kit 8 GPU Slots DDR3 Memory Integration VGA Interface

  • [Mine Motherboard ] BTC-S37 Mining Machine Motherboard is a motherboard CPU set for mining machines, with the characteristics of low power consumption, low heat generation, energy saving and power saving. The actual work done for you is lasting and beneficial..
  • [Stable Voltage ] Our motherboard has stabilized capacitors that can provide a stable voltage for your electrical equipment..
  • [Safe and Silent] It can ensure silent performance, low power consumption, reduce heat generation, energy saving and safe use..
  • [Memory and Storage Space] Memory slot, 8 graphics card plug. The actual work done for you is lasting and beneficial..
  • [Package Included] 1 x mining machine motherboard CPU set (excluding mining machine)..
Check Stock

8 GPU Mining Rig Frame for Crypto Coin Currency Bitcoin Ethereum BTC S37/B85/B75/AK2980-D8P-65 Motherboard Bracket Support to Dual Power 8 Graphics Card Miners Rack ETH BTC ETC ZEC

  • 8 GPU Mining Rig Open Type Graphics Card Machine Frame Case for AK2980-D8P-65 S37 B85-65 Pitch Miner Accessories.
  • The mining rig frame is a stackable CNC sheet metal graphic cardholder..
  • Easy to install, firm structure. Supports dual power supply..
  • According to the motherboard, graphics card, hard disk and power supply standard hole design..
Check Stock