Best Grades Of Lo

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

Frequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz

  • WITH VARIOUS PORTS-- There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
  • POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
  • EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
  • APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base sta....
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Monster Energy, Lo-Carb Monster, Low Carb Energy Drink, 16 Ounce (Pack of 12)

  • Unleash the beast | tear into a can of the meanest energy drink on the planet, lo-carb Monster Energy. Athletes, musicians, anarchists, co-ed's, road warriors, metal heads, geeks, hipsters, and bikers dig it- you will too..
  • Smooth & Easy flavor | lo-carb Monster packs a powerful punch, and has a smooth easy drinking flavor, but without the glucose! Low calories, no Compromise. That's what lo-carb Monster Energy is all about..
  • Big bad buzz | get the big bad Monster buzz you know and love, but with a fraction of the carbohydrates and only 35 calories per can!.
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Daiwa Seaborg SB1200MJ Fishing Reel

  • Gear Ratio: 1.5 inches (3.7 cm), Winding Length (per handle): 22.4 inches (57 cm), Maximum Drag Force: 8.1 lbs (23 kg), Body Weight: 2.4 oz (1,010 g).
  • Standard winding amount: Nylon (No. - m) 6 - 350, 7 - 300, 8 - 250 / PE (No. - m) 4 - 500, 5 - 400, 6 - 300.
  • Maximum Winding Force (kg): 29.4 lbs (90 kg) (when using Super Lithium : 100) / Normal Winding Speed : 2.2 lbs (1 kg) Load (m/min): Hi 180, Lo 125 (When using Super Lithium: Hi 200, Lo 140).
  • JAFS Standard Winding Force: 45.5 lbs (22 kg) / JAFS Standard Speed (m/min): Hi 230, Lo 150.
Check Stock

Tanacom 1000 Big Game Electric Fishing Reel English Display - Tanacom1000

  • Gear Ratio: 1.5 inches (3.7 cm), Winding Length (per handle): 22.4 inches (57 cm), Maximum Drag Force: 8.1 lbs (23 kg), Body Weight: 2.4 oz (1,010 g).
  • Standard winding amount: Nylon (No. - m) 6 - 350, 7 - 300, 8 - 250 / PE (No. - m) 4 - 500, 5 - 400, 6 - 300.
  • Maximum Winding Force (kg): 29.4 lbs (90 kg) (when using Super Lithium : 100) / Normal Winding Speed : 2.2 lbs (1 kg) Load (m/min): Hi 180, Lo 125 (When using Super Lithium: Hi 200, Lo 140).
  • JAFS Standard Winding Force: 45.5 lbs (22 kg) / JAFS Standard Speed (m/min): Hi 230, Lo 150.
Check Stock

Sulfo-Lo Cleansing Bar Soap with Sulfur for Face and Body, 3.5 Ounce

  • SULFUR BASE - Sulfo Lo skin cleansing bar soap contains 3% sulfur for a deep topical clean that leaves your skin feeling good and looking fresh..
  • SAFE FOR ALL – Suitable as a daily skin cleanser for adults and children, Sulfo Lo’s ingredients are gentle enough for all skin types..
  • GREAT FOR OILY SKIN - This cleansing bar soap reduces the oiliness of your skin, which in turn helps prevent blemishes..
  • DEEP CLEAN - Cleanse skin and remove trapped dirt, oils, and other impurities without stripping your skin. It’s a deep clean that leaves you feeling good..
  • TARGET BLEMISHES – Sulfo Lo relieves clogged pores by removing built-up skin cells, helping treat skin blemishes and other skin conditions..
Check Stock