Best Gpu Screws

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

...ve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
Note - The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply to work, and our motherboard only supports single power supply. If you want to use a multi-channel power supply, you need to short-circuit it. Please feel free to contact us if you have any questions..

Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..

Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..

Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

... escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use.Compatible with Win10 /OS, but you'll need to install the system yourself..
【Kindly Note】The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. The miner machine system doesn't come with GPU. Our products have undergone strict quality inspection before leaving the factory. If you encounter any problems during use, please feel free to contact us..

Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.....

Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket{20cm} 3.0 Gen3 Compatible

Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets..
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount..
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity..
Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..

Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

.... It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please refer to the picture or contact us..
Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency.(Graphics cards longer than 320mm cannot be used.) Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use..
Note - The GPU miner machine system doesn't come with GPU or PSU. Our mining rig frame can be used for rtx 3080/3090, but we recommend that you install 4-6 graphics cards. After exceeding, the motherboard will automatically limit the computing p....

Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

...ut to keep GPU/motherboard/PSU cool, the air volume is sufficient and silent enjoyment. Fan controller can control the fan speed from 2500 to 4500 rpm..
√【Mining rig Including】Our 8 GPU mining rig frame includes 2000-3000W Mining power supply, motherboard, CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package.The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
√【Mining Machine Case】The Complete ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. The crypto miner case is compatible with Windowx /Linux/OS. 8 GPUs can be installed on the motherboard at the same time, and we do not recommend mixing GPUs of various types..

Check Stock

Michal Tech Hobby Mining GPU Hanger for Wire Rack Pack of 6

HOBBY VARIATION - Heat resistant for complete open air system only. High heat tolerant variation for enclosed systems NOW FOR SALE: PROFESSIONAL GPU....
SIMPLE and CONVENIENT - Compatible with almost all wire racks.
EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
Full kit includes set of 6 screws and 6 hangers..
NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....

Check Stock