Best Gprs Car Alarm

4G LTE Vehicles Car GPS Tracker,Waterproof 4G GPS Tracking Device Motorcycle Trucks Locator Finder Strong Magnetic/Real Time Track/Alarm/Monitor 7800 mAh - 4G TK915

...ds a SIM card that supports 4G/2G Cellular. Make sure the SIM card must be able to make calls and send text messages, and has a subscription plan for data traffic that no less than 30M monthly. It has built-in 3.7V 7800mAh Li-ion battery, can standby up to 80 days. Working time: 2 Week..
★Powerful Magnetic & Shake Alarm ---- It has 6pcs built-in magnets,with super strong powerful magnetic,can be very easily installed.: After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS "sensor alarm!" to the admin number when the unit get shocked..
★Electronic Fence---- It has electronic fence, over speed, low power alarm,track the location of vehicles. Call the tracker, recieve an instant location map to your phone/tablet/PC of exactly where the tracker is located. You can track the history route of the device up to 6 months via both the web platform and APP!.
★Overspeed Alarm ---- This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message "speed alarm!" to the admin number every 5 minutes..
★Sleep Mode ---- 1.Sleep by time mode: After did this setting, tracker will only work for 5 min....

Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..

Check Stock

Car Alarm System with Remote Control, Security Antitheft Alarm System 120dB 6 Tone 7-Level Sensitivity Sensor,Alarm Loudspeaker Universal 12V Vehicle Alarm Security Protection System

【Wireless Car Alarm】 Wireless Car Alarm System: different from the normal car alarm, this car alarm system doesn't have main unit box, doesn't have many cables, no need cut any origianl car cables,no damage to original car circuit, the shock sensor and the air pressure sensor are wireless to siren..
【DIY Install Car Alarm】5 minutes to DIY Install: just need connect the siren black / red cable to car battery positive and negative port, then connect the high frequency antenna to siren connector, find a location and fix siren around the wiper, installation done! Don't like the normal car alarm, no need send to the car service shop for professional install, cost effective..
【2-way Pager Car Alarm】Built in air pressure sensor, when detect car door/window/trunk open illegally, the siren will alarm, and notify to LCD remote control.
built in vibration/motion sensor, when detect car vibration or motion, the siren will alarm and notify to LCD remote control also..
【Long Distance Alarm】The high frequency antenna ensure the car alarm system can be valid for 1000 meters..

Check Stock

VJOYCAR Wireless Car Alarm 2-Way LCD Pager Remote Control DIY Install Universal Vehicle Anti-Theft Security Siren Horn System with Shock Vibration Window Door Trunk Open Alarm

【Wireless Car Alarm】 Wireless Car Alarm System: different from the normal car alarm, this car alarm system doesn't have main unit box, doesn't have many cables, no need cut any origianl car cables,no damage to original car circuit, the shock sensor and the air pressure sensor are wireless to siren..
【DIY Install Car Alarm】5 minutes to DIY Install: just need connect the siren black / red cable to car battery positive and negative port, then connect the high frequency antenna to siren connector, find a location and fix siren around the wiper, installation done! Don't like the normal car alarm, no need send to the car service shop for professional install, cost effective..
【2-way Pager Car Alarm】Built in air pressure sensor, when detect car door/window/trunk open illegally, the siren will alarm, and notify to LCD remote control.
built in vibration/motion sensor, when detect car vibration or motion, the siren will alarm and notify to LCD remote control also..
【Long Distance Alarm】The high frequency antenna ensure the car alarm system can be valid for 1000 meters..
【Universal Car Alarm】Universal for cars 12-15V power input, pls don't install it if more than 15V voltage. Please contact with us at any time if you need assistance during insta....

Check Stock

Car Horn Siren Alarm,Universal Car Alarm Security Protection System with 2 Remote Controls,7-Level Sensitivity,12v,Anti-Theft Device,No Thread Trimmin,Non-Destructive Installation (CW-8131)

【Wireless Car Alarm】 Wireless Car Alarm System: different from the normal car alarm, this car alarm system doesn't have main unit box, doesn't have many cables, no need cut any origianl car cables,no damage to original car circuit, the shock sensor and the air pressure sensor are wireless to siren..
【DIY Install Car Alarm】5 minutes to DIY Install: just need connect the siren black / red cable to car battery positive and negative port, then connect the high frequency antenna to siren connector, find a location and fix siren around the wiper, installation done! Don't like the normal car alarm, no need send to the car service shop for professional install, cost effective..
【2-way Pager Car Alarm】Built in air pressure sensor, when detect car door/window/trunk open illegally, the siren will alarm, and notify to LCD remote control.
built in vibration/motion sensor, when detect car vibration or motion, the siren will alarm and notify to LCD remote control also..
【Long Distance Alarm】The high frequency antenna ensure the car alarm system can be valid for 1000 meters..

Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data t....

Check Stock

VJOYCAR DIYV1 1-Way Wireless Car Alarm Vehicle Security System Anti-Theft Burglar Vibration Sensor Horn Siren Universal 12V Auto Anti-Theft Protection System Simple DIY Install

【Wireless Car Alarm System】 Wireless Car Alarm System: different from the normal car alarm, this system doesn't have main unit box, no need cut original car cables. Won't Destroy Car Engine and Original Circuit..
【DIY Install Car Alarm】5 minutes to DIY Install: just need connect siren black and red cable to car battery - and +, then press the "lock" key on the remote control, it will be " ARM". Green cable is the antenna, no need connection, just make sure it face up..
【Vibration Sensor Alarm】When the vibration sensor siren detect vibration, it will remind 3 times.
if detect vibration again within 15 seconds, it will alarm..
【Universal Car Alarm】The accepted power supply is 9V-15V, therefore, it can be installed on all 12V cars, a real universal car alarm for all cars..
【Warranty】2 years quality warranty, during usage or install, if need any assistance, please don't hesitate to let us know, thanks..

Check Stock

Motorcycle Bike Anti-Theft Alarm System, 12V Universal Anti-Theft Security Alarm with Double Remote Control

Emergency Alarm: You can select the appropriate vibration sensitivity state of the remote control. Emergency alarm and vibration alarm.Forced open the electric door lock or start, horn alarm will be heard, direction lights will flash, engine will be locked in anti-theft alerting status..
Anti Robbery Alarm Function: supporting car parking yards car finding.In the huge parking lot, many cars look very similar. Even if you are very familiar with your car, you will waste some time searching. With this product, you can quickly find your own in the parking lot. The car, when you press the button, the car will sound an alarm, so you can quickly find your car..
Excellent Design: Small compact and waterproof ECU design, and high sensitivity. Peculiar loudspeaker with six tone sound system and 125Db sound level alarm horn can effectively deter thieves..
Ultra Low Power Consumption: without an effect on battery life. Use highly integrated coding technology and imported chip with strong anti-interference, more secure and stable performance..
High Performance: This product uses smart alarm automatically recognizes vibration frequency,high-decibel horn alarm and vibration alarm,you will hear the horn alarm, the direction lights will blink and the engine will be locke....

Check Stock

BANVIE Car Alarm System Security Antitheft Alarm Systems with Keyless Entry with Microwave Sensor & Shock Sensor

【Universal design】This car alarm system could fit for most of DC 12V cars(except old petrol cars). The remote controller has a zinc alloy frame, all buttons have good resilience..
【Keyless entry】This antitheft alarm systems have all basic keyless entry functions, such as lock/unlock, car finding, trurnk release, light flash, power window(original close model required), etc..
【Antitheft alarm】There is a 110dB siren with 6 tons for this car alarm, Alarming could be triggered by shock sensor & microwave sensor alarm and side door opening. Silent car alarm model could aslo be set..
【Engine blocking】This car alarm contains an engine cut-off relay. In arm status, it can cut off engine power and make engine fail to start. In running, it can cut off power to come with Anti-hijacking function..
【Central door locking automation】Car door will auto-lock after driving, and unlock after key turned to ACC OFF, So it will very safe for children in car. this function could be set ON or OFF(factory default is ON)..

Check Stock